Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Trend Micro Control Manager


You can integrate a Trend Micro Control Manager device with JSA.

A Trend Micro Control Manager accepts events using SNMPv1 or SNMPv2. Before you configure JSA to integrate with a Trend Micro Control Manager device, you must configure a log source, then configure SNMP trap settings for your Trend Micro Control Manager.

Configuring a Log Source

JSA does not automatically discover SNMP events from Trend Micro Control Manager.

You must configure an SNMP log source for your Trend Micro Control Manager to use the SNMPv1 or SNMPv2 protocol. SNMPv3 is not supported by Trend Micro Control Manager.

  1. Log in to JSA.
  2. Click the Admin tab.
  3. On the navigation menu, click Data Sources.
  4. Click the Log Sources icon.
  5. Click Add.
  6. In the Log Source Name field, type a name for your log source.
  7. In the Log Source Description field, type a description for the log source.
  8. From the Log Source Type list, select Trend Micro Control Manager.
  9. From the Protocol Configuration list, select SNMPv2.
  10. SNMPv3 is not supported by Trend Micro Control Manager.

    Configure the following values:

    Table 1: SNMPv2 Protocol Parameters



    Log Source Identifier

    Type the IP address or host name for the log source as an identifier for events from your Trend Micro Control Manager appliance.


    Type the SNMP community name required to access the system containing SNMP events. The default is Public.

    Include OIDs in Event Payload

    Clear the Include OIDs in Event Payload check box, if selected.

    This options allows the SNMP event payload to be constructed using name-value pairs instead of the standard event payload format. Including OIDs in the event payload is required for processing SNMPv2 or SNMPv3 events from certain DSMs.

  11. Click Save.
  12. On the Admin tab, click Deploy Changes.

    The configuration is complete.

Configuring SNMP Traps

You can configure SNMP traps for Trend Micro Control Manager.

Trend Micro Control Manager v5.5 requires hotfix 1697 or hotfix 1713 after Service Pack 1 Patch 1 to provide correctly formatted SNMPv2c events. For more information, see your vendor documentation.

  1. Log in to the Trend Micro Control Manager device.
  2. Select Administration >Settings >Event Center Settings.
  3. Set the SNMP trap notifications: In the SNMP Trap Settings field, type the Community Name.
  4. Type the JSA server IP address.
  5. Click Save.

    You are now ready to configure events in the Event Center.

  6. Select Administration >Event Center.
  7. From the Event Category list, expand Alert.
  8. Click Recipients for an alert.
  9. In Notification methods, select the SNMP Trap Notification check box.
  10. Click Save.

    The Edit Recipients Result window is displayed.

  11. Click OK.
  12. Repeat Configuring SNMP Traps for every alert that requires an SNMP Trap Notification.

    The configuration is complete. Events from Trend Micro Control Manager are displayed on the Log Activity tab of JSA. For more information about Trend Micro Control Manager, see your vendor documentation.