Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Viewing the Configlet


In View or Design action mode, select Network > Elements > Tunnels.

Figure 1: Tunnel Details Window
Tunnel Details Window

Right-click on the desired tunnel in the table, and select Configlet from the popup menu to generate its configlet in the /tmp directory. The generated configlet will be immediately available for viewing.


he configlet generated here is not saved to the LSP directory. To do so, you should run Design > Configlets/Delta > LSP Configlet as described in step 2.

If an IP address of a node is not available, the node name may be used in its place even though this may not be allowed in the router. To fix this, you should configure IP addresses for nodes and/or links in your network. This can be done in the Properties tab of the node modification window or the Location tab of the Link Modification window.

Here is an example of a generated configlet for node BOS, a Cisco router: