Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Network Node Info Actions Window

 

The IP/MPLSView main window has a Network menu used to display details about a selected node. There is also a window for performing actions on the node. Select Network>Nodes to display the Nodes list. Select a node from the list to display the Node Info window.

In the Node Info window, select the Actions tab to display an interactive window where you can access the CLI of the selected node, ping the node, and display jitter information.

Figure 1 shows the Node Info Actions window.

Figure 1: Node Info Actions Window
Node Info Actions Window

From the Execute CLI Command menu, select the command you want and click the right arrow icon. There are hundreds of show commands available. A View Configuration Info window is displayed.

Figure 2 shows the View Configuration Info window results of a show chassis fpc detail command.

Figure 2: View Configuration Info Window
View Configuration Info
Window

From the menu, select the command you want to display with XML formatted output. Figure 3 shows the View Configuration Info window results of a show chassis fpc | display xml | no-more command.

Figure 3: View Configuration Info Window with XML Format
View
Configuration Info Window with XML Format

You can ping from one node to another or ping from the selected node to another.

Select a node from the Ping From menu. Select a node from the to menu and click the right arrow icon.

The Ping Results window is displayed. Figure 4 shows the Ping Results window.

Figure 4: Ping Results Window
Ping Results Window

To ping from the selected node to another node, select the destination node and click the right arrow icon at the end of the Ping from this router menu.

To perform an MPLS ping from the selected node to another node, select the destination node and click the right arrow icon at the end of the MPLS Ping from this router menu.

To display the jitter value for the selected node, click View Jitter Information. To confirm connectivity from the server to the selected node, click Check. The results (up or down) are displayed next to the Check button. The jitter value is displayed only if SLA probes are configured on the device.

Related Documentation