Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Collecting Supplementary Device Data Overview

 

The Collecting Supplementary Device Data chapter of the Management and Monitoring Guide for IP/MPLSView describes how to collect data from the network through the User CLI Collection task within the Task Manager as well as through the device’s right-click menu. The data collected is the output of various specified Command Line Interface (CLI) “show” commands.

Use this to collect additional “show” command data other than the config file, interface, and tunnel information available to the Scheduling Live Network and Network Data Collection task described in Live Network Collection Overview.

You must have a live network (File>Open Live Network) or a router spec opened.

You also must have set up a profile for the network routers from which you want to collect data as described in Setting Up Device Profiles Overview.

Following is a high-level, sequential outline of the router data collection process and the associated, recommended procedures.