Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

List of Network Reports

 

Depending on the network type, the Report Manager displays a different set of reports. The following table lists the available reports. Reports marked with (Router) are device-specific reports and will only appear for the corresponding network type. All other reports are general and should appear for all networks.

Note

Reports followed by an asterisk (*) require a feature-related license.

Demand Reports

File

Description

Demand Path & Diversity

PATHRPT

Lists details of all user demand requirements in the network. See Demand Reports

CoS Demands* (Router)

DEMANDCOS

Displays the worst propagation and queueing delays for each demand. See CoS Demands Report .

Demand Route Cost

CKTCOST_RT

Provides utilization costs according to demand routes. See Demand Route Cost Report .

Equal Cost Multi-Path (Router)

EQPATHRPT

Lists equal cost multiple paths that exist in the network for nodes in the same AS and same OSPF area, and also for inter-area and inter-VPN demands. See Equal Cost Multi-Path Report.

Demand Link

DEMAND_LINK

Displays the demand path through links by interface out and in sequence.

Link Reports

File

Description

Planned Link Utilization

LKUTIL

Provides demand bandwidth utilization information for each link in the network. See Link Reports.

Planned Physical Interface Utilization

PHYUTIL

Provides demand bandwidth utilization information for each physical interface in the network. See Planned Physical Interface Utilization.

Per Node Pair (Measured)

MEASUREDLKBWRPT

Shows link utilization by period from the interface ingress and egress traffic files between connecting nodes.

Measured Link Util (based on trafficload)

L3LINKUTIL

Shows the measured traffic by link based on the trafficload file.

Demand Traffic vs Interface Traffic

L3LINKUTILCOMPARE

Shows the comparison between planned and measured traffic. See Demand Traffic Versus Interface Traffic.

Demand Traffic vs Physical Interface Traffic

L3PHYUTILCOMPARE

Shows the comparison between planed and measured traffic on physical interfaces.

CoS Links* (Router)

LINKCOS, L2_LINKCOS

Displays the worst propogation and queueing delays for each CoS class on each link. See CoS Links Report.

Link Cost

LKCOST

Provides detailed link pricing information.

RSVP Bandwidth Allocation (Router)

LKPART

Displays link partitions and their capacity allocation.

Interface Traffic

File

Description

Interface Traffic (Router)

IntfUtil

Displays interface load and utilization information. See Interface Traffic Report.

Interface CoS Traffic (Router)

INTFCOS

Displays interface Traffic by Class of Service.

Interface Multicast Traffic (Router)

INTFMULTICAST

Displays interface Multicast Traffic.

AS Traffic (Router)

ASTraffic

Displays traffic information for interfaces at different AS’s. See AS Traffic Report

Inter-AS Traffic (Router)

InterASTraffic

Displays traffic information between different AS’s. See Inter-AS Traffic Report.

Inbound/Outbound Network Traffic (Router)

NWKTRAF

For each node, displays an aggregate outbound and aggregate inbound value, corresponding to the sum of traffic originating and terminating at a node respectively - but only on interfaces that do not correspond to any links in the network model ( for example, customer-facing interfaces, PE-CE interfaces when CE configuration files are missing from the network model). This information is derived from the measured traffic on the interfaces (interface “egress” and “ingress” traffic files in the File > Load Network Files window). One purpose for this file is for use in the Traffic Matrix tool, as described in the Router Feature Guide for IP/MPLSView.

Group

File

Description

Group Demand Summary by Group Pair

GROUPDEMANDSUMMARY

Shows summarized information for demands that are requested within a group or between two different groups.

Group Demand Detail by Group Pair

GROUPDEMANDDETAIL

Shows detailed information for demands that are requested within a group or between two different groups.

Group Demand Traffic on Link Summary

GROUPLINKSUMMARY

Shows summarized information for links that exist within a group or between two different groups.

Group Demand Traffic on Link Detail

GROUPLINKDETAIL

Shows detailed information for links that exist within a group or between two different groups.

Group Interface Load Summary (Router)

GROUPINTFSUMMARY

Shows summarized information for interface load of links within a group or between two different groups.

Group Interface Load Detail (Router)

GROUPINTFDETAIL

Shows detailed information for interface load of links within a group or between two different groups.

Group Demand Bandwidth Distribution

L3GROUPLOAD

Shows traffic statistics for groups such as source, destination, transit, and intra-group traffic.

Node

File

Description

Demand Traffic Per Node

SWITCHCONN

Shows statistical information on demands that originate, pass through or terminate at each node in the network.

Measured Interface Traffic Per Node (Router)

MEASNODELOAD

Displays up to 24 periods of total incoming and outgoing traffic from each node based on the measured interface traffic data. Note that only interfaces corresponding to links in the network model are considered.

Node Link Port

NodeLinkPort

Displays the number of ports on a node by link type.

VPN

File

Description

VPN Interface Traffic (Router)

VPNINTFTRAF

Reports the ingress and egress traffic on VPN interfaces for each traffic load period.

VPN Interface CoS Traffic (Router)

VPNINTFCOS

Reports VPN interface traffic broken down into CoS classes.

VPN Interface Multicast Traffic (Router)

VPNINTFMULTICAST

Reports on the VPN interface multicast traffic load.

VPN Export-Import (Router)

VPNEXPORTIMPORT

Displays the route target export/import relationships that exist between VPNs in the network.

Layer3 (Router)

VPNREPORT_LAYER3

Displays the details of Layer 3 VPN’s in the network.

Layer2 Martini (Router)

VPNREPORT_LAYER2

Displays the details of Layer 2 Martini VPN’s in the network. See Layer2 Martini Report .

Layer2 Kompella* (Router)

VPNREPORT_L2KOMPELLA

Displays the details of Layer 2 Kompella VPN’s in the network. See Layer3/Layer2 Kompella Report

Layer2 CCC (Router)

VPNREPORT_L2CCC

Displays the details of Layer 2 circuit cross-connect VPN’s in the network.

VPLS-LDP

VPNREPORT_VPLS

Shows LDP based VPLS information

VPLS-BGP

VPNREPORT_VPLS_JUNIPER

Shows BGP based VPLS information. Juniper Networks only.

Protocols

File

Description

Route Instance (Router) *

RTINSTRPT

Reports on Routing Instances for OSPF or IS-IS. For more information, see the Router Feature Guide for IP/MPLSView, Routing Instances chapter.

Subnet (Router) *

SUBNETRPT

Displays all subnets in the network model

BGP > BGP * (Router)

BGPRPT

Also called the BGP Integrity Checks Report. It contains four sections (select Application > Options > Report) including Unbalanced BGP Neighbor Check, IBGP Mesh Connectivity Check, Local/Neighbor AS Specification, and Route Reflector Statistics. See BGP Reports

OSPF > Inter Area Load Distribution* (Router)

INTDOMLOAD

Displays the load distribution between areas in the network

OSPF > Inter Area Paths* (Router)

INTDOMPATH

Displays information regarding paths between two user-specified areas

OSPF > Area Pass through Paths* (Router)

DOMPASSTHRU

Generates information regarding demands passing through an area in the network

OSPF > OSPF Area Summary* (Router)

OSPFSUMMARYRPT

Shows summarized information for each OSPF area See OSPF Area Summary

OSPF > OSPF Area Detail* (Router)

OSPFDETAILRPT

Shows detailed information for all routers in each OSPF area. See OSPF Area Detail Report

OSPF > ABR Bordering Area* (Router)

ABRBORDERRPT

Displays the bordering areas for each ABR. See ABR Bordering Area Report.