This section lists the issues fixed in WANDL IP/MPLSView Release 6.4.0S2. The identifier associated with each entry is the tracking number in the Juniper Networks Problem Report (PR) tracking system.
In the web UI, users of Administrators group showed the empty network.
WANDL IP/MPLS Live VPN traffic did not load in the web view.
There was an issue with WANDL configuration reporting.
WANDL Hardware Inventory Report was missing transceivers or interface slots on various Cisco Devices.
There was a web server issue after upgrading to Release 6.4.0 from Release 6.3.0S11.
Topology links were stitched through an Ethernet node even for P2P links.
Link Util Reports were not populated correctly.
L3 VPN interfaces were listed in VRF Lite VPN interface in the web.
Alcatel Devices VPLS LDP VPN name had VPLS-*VCID.
Layer 2 Martini VPN under topology displayed lots of nodes.
Some of the L3 VPNs with ALU device in it were not listed based on the VRF name under layer 3 VPN.
WANDL showed multiple instances of VRF name.
Lots of tunnels were shown as Unplaced after an upgrade to 6.4.0S1.
Client (both Java and web) took too long to load.
For a very large network, links showed negative count.
Inconsistent display for OSPF ABR in the web.
WANDL was not able to read whole device configuration file.
Tunnels were placed over VT (Virtual Trunk).
Missing Cards and Serial numbers from Casa Device.
Selective Interface to capture traffic only on interfaces which have comments was not working.