Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Spec File Parameters

    If you want to save the imported traffic in your network scenario, go to File > Save in Spec Dir, for example, to save any new configurations to the specification file.

    In the File Manager, right click on the newly created (or refreshed) specification file and select from the popup menu Spec File > Modify Spec, or select Edit to view the text version of the spec.

    The traffic-related specification file parameters are described below.

    Figure 1: Spec file

    Spec file

    Interface Traffic Parameters

    Description

    egress

    The egress file contains egress traffic of the network’s interface load. Egress traffic specifies traffic that is going out of the network’s interfaces. This data is used for calculating link utilization and load.

    Results can be viewed graphically from the Standard map’s “Utilization Legends > Measured Link Util” legend.

    ingress

    The ingress file contains ingress traffic of the network’s interface load. Ingress traffic specifies traffic that is going into the network’s interfaces. This data is used for calculating link utilization and load.

    trafficload

    24-period traffic measured on interfaces. When importing traffic, the trafficload file is automatically named trafficload.runcode and placed in the trafdir. Results can be viewed graphically from the Standard map’s “Utilization Legends > Demand Cos Util” legend.

    trafdir

    The location of the interface traffic daily directories repository.

    Tunnel traffic Parameters

    Description

    t_trafficload

    t_trafficload

    tunneltrafdir

    The location of the tunnel traffic daily directories repository.

    Modified: 2016-11-08