Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing Inter-Area Tunnels

    Once the LSP tunnels have been created, update the network state by clicking the “Update” button just below the main menus. Then, select Modify > Elements > Tunnels. Notice the @@ symbol in the Current Route field indicating the border between two areas.

    Figure 1: Current Route of Newly Created Tunnels

    Current Route of Newly Created Tunnels

    Click “Show Path”. On the Paths window right-click a column header and select “Table Options” and add the Area column as shown below.

    Figure 2: Path of an Inter-Area LSP Tunnel between B2 and R2

    Path of an Inter-Area LSP Tunnel between B2 and R2

    You can also view a detailed report of the LSP Tunnels. Go to Report > Report Manager. In the Report Manager, choose the Tunnel Path & Diversity Report under Tunnel Layer Network Reports > Tunnel Reports.

    Modified: 2016-11-08