Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Validating the Router Profile and Scheduling CLI Collection

    The following steps can be used to validate the router profile if the tasks are to be run manually without the task chaining mentioned in Chaining VLAN Discovery with Network Config Data Collection.

    1. From the Router Profile window (Admin > Task Manager, Router Profile), select the router profile that has been generated in the last step and select Actions > Test Connectivity.
    2. In the Test Connectivity window, click the Options... button to enter in the following options:
      • Alternative login/password(s) on the Login/Password tab.

        Figure 1: Alternative Login/Passwords

        Alternative Login/Passwords
      • Optional SNMP get community string(s) on the SNMP tab.

        Figure 2: Alternative SNMP Community Strings

        Alternative SNMP Community Strings
      • Connectivity options (for example, Ping, Telnet, SSH, and/or SNMP) on the General tab.
      • Allow for concurrent access of a number of devices (Number of simultaneous access) on the General tab.

        Figure 3: Test Connectivity General Options

        Test Connectivity General Options
    3. Click the Start button to begin the connectivity test.
    4. Once the connectivity test is completed, accept the corrections that are made, for example, to the login information of the router profile, via the Profile Fix button menu.
    5. The resulting profile is now ready for CLI collection via the Scheduling Live Network Collection task. (Admin > Task Manager, New Task, Scheduling Live Network Collection). For the collection methods, select config, interface, equipment_cli, and any other information of interest.

    Modified: 2016-11-08