Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Main Window SRLG Table

    The IP/MPLSView main window has network information tables that contain detailed information about nodes, links, tunnels, and shared risk link groups (SRLGs).

    Identifying SRLGs is important when planning MPLS label-switched path (LSP) diversity.

    Figure 1 shows the main window SRLG table, the SRLG details window, and the SRLG links highlighted in the topology map.

    Figure 1: Main Window SRLG Table

    Main Window SRLG
Table

    Table 1 describes the SRLG table columns.

    Table 1: Main Window SRLG Table Columns

    Column Name

    Description

    ID

    Identifier of the SRLG. For SRLGs created automatically, the name is derived from the node name and common part of the interface names. If you create the SRLGs, you configure the name.

    Nodes

    Number of nodes. SRLGs created automatically do not include the nod and the display is 0. SRLGs created manually might include nodes and links.

    Links

    Number of links that are in the shared risk group.

    Node Names

    The name of the node in manually created SRLGs.

    Link Names

    Name of the links that are in the shared risk group.

    Double-click the SRLG identifier. An SRLG detail window is displayed and the SRLG links are highlighted in the topology map.

    In the SRLG details window, expand the lists to display information such as the name of the links, the protocols configured on the links, and the RSVP bandwidth on the source node and the target (destination) nodes at each end of the links.

    Modified: 2017-03-30