Link Menu Tunnels On or Thru Link
The IP/MPLSView main window has network information tables that contain detailed information about nodes, links, and tunnels.
In the IP/MPLSView main window, select a link in the map, right-click, and select Tunnels On or Thru Link. The Tunnel table is displayed.
Figure 1 shows the main window Tunnel table.
Figure 1: Main Window Tunnel Table
Each column head has a menu. From the menu within each column, the element information can be sorted in ascending or descending order. You can select which columns are displayed or hidden. Columns can also be resized and the order can be rearranged.
Table 1 describes the Tunnel table columns.
Table 1: Main Window Tunnel Table Columns
Column Name | Description |
|---|---|
Name | Name of the tunnel. |
Node A | Name of node A at one end of the tunnel. |
Node Z | Name of node Z at one end of the tunnel. |
IP A | IP address of node A at one end of the tunnel. |
IP Z | IP address of node Z at one end of the tunnel. |
Bandwidth | Bandwidth required by the tunnel. |
Metric | The routing tunnel metric. |
Path Type | Type of path: Primary, Secondary, or Standby. |
Path Name | Path name, if configured. |
Op Status | The operational status of the path. |
Admin Status | Current status of the tunnel: Unknown, Install, Active, Live, Order, or Planned. |
Setup | RSVP setup priority for the tunnel traffic. |
Hold | RSVP hold priority for the tunnel traffic. |
Explicit Route | RSVP explicit route object for the tunnel, if configured. |
