Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing Tunnel-Related Reports

    The following lists and describes the tunnel-related reports accessible from the Report Manager (Report > Report Manager).

    Report/Category

    Description

    Tunnel Path & Diversity

    Displays each of the tunnel’s requirements and routed path specification.

    Tunnel Route Cost

    Displays the calculated cost for each tunnel in the network based on the sum of the link costs.

    Demand Traffic on Tunnel

    Displays the values of the reserved tunnel bandwidth verses the flow bandwidth and their difference ratio.

    Tunnel Traffic

    This report has to do with multiple-period traffic load on the tunnels.

    Tunnel-Link

    This report breaks up each tunnel into each interface segment of the tunnel path.

    Tunnel RSVP BW on Link

    Tunnel RSVP BW on Node Pair

    • Link: Displays the Amount of Link RSVP bandwidth used by tunnels per link
    • Node Pair: Displays the Amount of Link RSVP bandwidth used by tunnels per node pair

    Tunnel Traffic vs Interface Traffic

    Compares aggregate tunnel traffic load versus the measured interface traffic.

    Link Partition

    This report breaks up the link bandwidth into partitions (RSVP and GB=Guaranteed Bandwidth, GlobalPool and SubPool, or CT partitions for DiffServ-TE) and shows the tunnel bandwidth for each partition.

    Measured Link Util (based on T_trafficload)

    Per Node Pair (Measured)

    In the live network mode, this report provides the aggregate tunnel traffic load on the link.

    Per Node Pair (Measured): In the live network mode, this report provides the aggregate tunnel traffic load on the node pair.

    Peak Tunnel Traffic on Links

    Found under Tunnel Layer Simulation Reports > Tunnel Layer Network Statistics, This report is only useful after having run a failure simulation on the network. Displays the peak utilization of the links that is reserved by tunnels.

    Tunnel Layer Group

    • Group Tunnel Summary by Group Pair: Displays summary information for tunnels between two groups.
    • Group Tunnel Detail by Group Pair: Displays detailed information for each tunnel that is between two groups or within one group.
    • Group Tunnel Traffic on Link Summary: Displays summary information on tunnel traffic between two groups or within one group.
    • Group Tunnel Traffic on Link Detail: Displays detailed information for tunnel traffic that is between two groups or within one group.
    • Group Interface Load Summary: Displays summary information between interfaces of nodes in two groups or within one group.
    • Group Interface Load Detail: Displays detailed information between each interface pair where the nodes are in two groups or within one group.
    • Group Tunnel Bandwidth Distribution: View the distribution of Originating, Terminating, Transit, and Local tunnel bandwidth

    Planned Tunnel RSVP BW Per Node

    Found under Tunnel Layer Network Reports > Node, this report provides information on local, non-local and transit tunnels at each node. A local tunnel is one that starts and ends at itself, and a non-local tunnel is one that originates or terminates at the node.

    Measured Tunnel Traffic Per Node

    Found under Tunnel Layer Network Reports > Node, this report provides measured inbound and outbound traffic per node.

    Modified: 2016-11-08