Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing Summarized Traffic Statistics on the Map

    1. From the Standard map, select the legend Utilization Legends > Measured Link Util to view the measured interface traffic per period, based on the egress/ingress files.
    2. Alternatively, in the Traffic > Traffic Load window shown in <Link>Figure 1, click on the Interface radio button (or Tunnel radio button if you are importing tunnel traffic).

      Figure 1: Load/Util window with Traffic Load “slider”

      Load/Util window
with Traffic Load “slider”

      Then, click on Run button for an animated 24-period link utilization display. The 24 periods represent 24 hourly values. You can also drag the slider to a particular period and view the corresponding link utilization on the topology map. The second “tick” on the slider shows the Worst period. Worst represents the highest value of the 24 periods.

    3. Right-clicking on a link will also display the 24-hour interface traffic barchart.

      For interface traffic, select from the popup menu Traffic Load > Measured Interface Traffic to bring up the corresponding traffic barchart.

      For tunnel traffic, select from the popup menu Traffic Load > Tunnel Traffic on Link to bring up the corresponding traffic barchart.

    Modified: 2016-11-08