Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    View Static Routes

    To view the static route table of a node, you must be in either View, Design, or Simulation mode.

    From the Map window, right-click on the node of interest and select View>Static Route Table. Alternatively, select Network > Protocols > Static Route Table.


    Interpreting the Static Routing Table


    A Static Routing Table window is displayed as shown here.

    Figure 1: Viewing static routes

    Viewing static routes

    Field

    Description

    Node

    The node from which the static route starts.

    VRF

    Virtual Routing Forwarding identification.

    Dest. (IP/Mask)

    The IP of the final destination.

    Dest. Node

    The node name of the final destination.

    Admin Distance

    The admin distance associated with the static route.

    Next Hop Link / Interface

    The next immediate link name or interface in the static route.

    Next Hop Node / IP

    The next node name or IP address in the static route. This may also be the final destination node in some cases.

    Next Hop Tunnel

    The next immediate tunnel in the static route.

    Select a static route to view its details in the lower half of the window.

    Click the Show Path button to highlight the static route path in the Map window.

    Modified: 2016-11-08