Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Link Bandwidth Reservation

    Individual link bandwidth reservation schemes can be assigned to a link by applying a CoS policy to that link. IP/MPLSView allows the user to define a robust collection of CoS policies, which can be specific to a router or generic to all routers.

    Figure 1: Defining Scheduler Maps or CoS Policies

    Defining Scheduler Maps or CoS Policies

    Once CoS policies, have been defined, they can be assigned to specific links. Since each link contains two interfaces, one at each end, a policy can be assigned to each end of the link.

    Figure 2: Assigning a Scheduler Map or CoS Policy to a Link

    Assigning a Scheduler Map or CoS Policy to a Link

    Once a policy has been assigned to a link, the capacity on the link will be updated to reflect the policy. The way in which the bandwidth is displayed in the link capacity window can be controlled by Bandwidth Model option described earlier. In the screenshot below, the Bandwidth Model being used is MAM.

    Figure 3: Link Capacity Reflecting the Assigned Scheduler Map or CoS Policy

    Link Capacity Reflecting the Assigned Scheduler Map
or CoS Policy

    Partition

    This corresponds to the class type associated with the policy assigned to the interface.

    RSVPBW

    This is the amount of bandwidth reserved for the corresponding partition, as defined by the assigned policy.

    TunnelBW

    This is the amount of tunnel bandwidth currently passing through the interface.

    AvRSVP

    This is the amount of available bandwidth remaining for the corresponding partition.

    Modified: 2016-11-08