Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Network Performance Data Chart Report


    How to Prepare the Data


    A report group is a group containing the router interfaces that will be reported on in the resulting traffic report. From the web, create report groups from Admin > Report Groups. Select the created report group to add the desired router interface(s) one by one.

    After creating the report group, schedule the Network Performance Data Report task as described in Network Performance Data Report. On the Report Parameters tab, include minimally the format Data Chart and a report title. On the Report Attributes tab, specify the report group defined from the web, and select the desired attributes to report on, for example, the Egress utilization. If you have not yet collected one days’ worth of traffic, you will not see data from a query of the last day, for example, Query data over the last 1 Day. Instead, you can query over the last few hours, for example, Query data over the last 5 Hours. Alternatively, you can specify a specific date/time range by using the option Specify the report query date range.


    Viewing the Reports


    Once the report is created, select the title of the report and then select the date/time that it was generated. Reports are provided for CPU, Memory, Ingress and Egress Traffic and Error Count. After selecting the report name, click on the link corresponding to the day that you would like to view.

    • Network_Data_Report: This report will provide CPU and Memory information, one chart per device such as the following.
    • Device: This report will provide CPU and Memory information, one chart per device such as the following.

    Network Performance PDF Chart Report


    This is similar to the Network Performance Data Chart Report above, except that the chart is provided in PDF format. The difference during setup is that the format PDF Chart should be selected as the output from the Report Parameters tab of the Network Performance Data Report task.

    Modified: 2016-09-08