Recommended System Configuration
IP/MPLSView is a client-server application that allows you to access the program on a Linux server using a Java client or Web browser from a Windows, Mac, or Linux platform. Before installing IP/MPLSView, check your hardware specifications. The following system configuration is recommended.
Server
- 64-bit Linux OS (can be CentOS 6.6 or Red Hat 6.6 and later releases up to and including CentOS 7.0, or Red Hat 7.2)
- Minimum 4 GB RAM (4 GB RAM or more recommended)
- Minimum 40 GB disk space (100 GB or more recommended for online features)
- The swap space can be configured as approximately two times the physical RAM
 | Note: For more information about Linux versions, including CentOS source-code monthstamps, see your operating system vendor. For more information about IP/MPLSView compatibility, contact the Juniper Technical Assistance Center (JTAC). |
Client
- PC running Windows XP/Vista/7/8/10
- Linux
- XVGA monitor and graphics card
- Minimum 512 MB RAM (4 GB RAM or more is recommended)
- 100 MB disk space
Traffic Data Collector (for Online Traffic Collection Module)
- Linux
- 1 collector per 100 to 150 devices
- Minimum 2 GB RAM (4 GB RAM or more recommended)
- Minimum 75 GB disk space
| Note: One collector server can run many instances (10-20 or more) to distribute load but the total number of devices is limited. |
| Note: IP/MPLSView Release 6.2.0 and later are not distributed on CDROM. |
