Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Node Menu Run CLI

    In the IP/MPLSView main window, select a node in the map, right-click, and select Protocol Status>Run CLI. The Run CLI window is displayed. Figure 1 shows the Run CLI window.

    Figure 1: Run CLI Window

    Run CLI Window

    From the Device menu, select the device you want. From the CLI Commands list, select the commands you want to run and click Collect. The Please input parameters window is displayed. Figure 2 shows the Please input parameters window.

    Figure 2: Command Input Parameters Window

    Command Input
Parameters Window

    Type the necessary parameters and click Run CLI. The command results are displayed in the Output pane. You can print, save, and clear the results.

    Select Traceroute. You are prompted to select a destination node. Select the node in the topology. The Traceroute results window is displayed. Figure 3 shows the Traceroute results window.

    Figure 3: Traceroute Results Window

    Traceroute Results

    Related Documentation


    Modified: 2016-09-26