IP/MPLSView LSP Tunnels Overview
This chapter describes how to view and modify Label Switched Path (LSP) tunnel information using IP/MPLSView. This includes secondary/standby and backup paths, affinity and mask. If you have a Multiprotocol Label Switching (MPLS) network, then you should familiarize yourself with this chapter.
 | Note: A license is required for the tunnel feature. Please contact your Juniper representative for more information. If you wish to perform this task in the IP/MPLSView client,
you should have a router specification file open before you begin.
To follow along with this tutorial, you can open the spec.mpls-fish
specification file located in your |
