Deploying the vSRX as an Advanced Security Service in a VMware NSX Environment

Use the following procedures to deploy the vSRX as an advanced security service virtual machine (VM) in the VMware NSX environment. The vSRX VM is deployed in conjunction with Juniper Networks Junos Space Security Director and VMware NSX Manager. In each procedure you are instructed whether to perform the steps in the NSX Manager (from the VMware vCenter Server) or in the vSphere cluster. For example, you create the security group using the NSX Manager, but the discovery of devices happens in the vSphere cluster.

The deployment steps are performed in the following sequence :

• Creating a Security Group (VMware vCenter Server)

• Discovering the NSX Manager and Registering vSRX as a Security Service in vSphere cluster

• Deploying vSRX as a Security Service on a vSphere Cluster (VMware vCenter Server)

• Verifying vSRX Agent VM Deployment in Security Director

• Automatic Creation of Security Policy in the NSX Environment to Direct Traffic Through the vSRX Agent VMs (VMware vCenter Server)

Creating a Security Group (VMware vCenter Server)

You create a security group by using the NSX Manager from the VMware vCenter Server. Each security group is a logical collection of objects from your vSphere inventory. These objects include VMs that you want to be members in the same security group and to which you will apply the vSRX as a Juniper security service. You can apply an advanced security service policy to all the objects contained in a security group.

Procedure

1. Log in to the vSphere Web Client through the VMware vCenter Server.
2. From the vSphere Web Client, click Hosts and Clusters to view hosts and clusters in the vSphere Web Client inventory. From the Summary tab, you can verify the vSphere cluster and the VMs associated as part of this cluster. All VMs are part of the VXLAN network and can communicate over this VLAN.
3. From the vSphere Web Client, click Networking & Security and then click Service Composer. The Service Composer appears. From the Service Composer, click the Security Groups tab.
4. Click the Add Security Group icon to create a new security group that contains the specific VMs you want as members of the same group, as shown in Figure 35.

   Figure 35: Create a New Security Group Page

   
5. Type a name and description for the security group and then click Next.
6. On the Define dynamic membership page, define the criteria that an object must meet for it to be added to the security group you are creating. You can define a dynamic group membership criteria for the VMs that are to be part of each security group. For example, VM membership in a security group can be tagged by name. You define the exact membership criteria that you want to use to group VMs. Group membership is associated dynamically at runtime.

   Click Next.

7. On the Select objects to include page, select the tab for the resources you want to include in this security group. Click Next.
8. On the Select objects to exclude page, select the tab for the resources you want to exclude from this security group. Click Next.
9. Click Finish to complete creating the security group.

Discovering the NSX Manager and Registering vSRX as a Security Service in vSphere cluster

You use the Junos Space vSphere cluster to discover the NSX Manager and perform service registration of the vSRX VM with the NSX Manager. The NSX Manager is added as a device in the Security Director, and its inventory is synchronized with the Security Director.

Procedure

1. Select Security Director > Devices > NSX Managers.

   The NSX Managers page appears.

2. Click the Add icon (+) to add the NSX Manager to the Security Director.

   The Add NSX Manager page appears, as shown in Figure 36.

   Figure 36: Add NSX Manager Page

   
3. In the NSX Manager section, enter the following information:

   • Name—Enter the name of the NSX Manager.

   • Host—Enter the IP address of the NSX Manager.

   • Port—Enter the port number of the NSX Manager. The NSX Manager and Security Director use SSL to communicate on TCP port 443.

   • Username, Password—Enter the username and password of the NSX Manager that are required for communication to be authenticated by the Security Director.

   • Description—Enter a description for the NSX Manager you are to add to the Security Director.

   • SSL Certificate—View the SSL certificate to authenticate the NSX Manager and select the Accept SSL Certificate option to accept the SSL certificate.

     This is a mandatory field to discover the NSX Manager. The SSL Certificate field appears once you enter the NSX details.

4. Click Next.
5. In the Service Manager Registration section, enter the following details about the Security Director:

   • SD Username, SD Password—Enter the username and password of Security Director to allow the NSX Manager to authenticate communication to the Security Director.

   • License Key—Enter the license key for the previously procured Juniper SDSN for NSX license (see Juniper SDSN for VMware NSX Licensing for background details).

6. Click Next.
7. In the vCenter Server section, provide the following details about the vCenter Server:

   • Host—Enter the IP address of the VMWare vCenter Server.

   • Port—Enter the port number of the VMWare vCenter Server. By default, 443 is used.

   • Username, Password—Enter the username and password of the VMware vCenter Server. Security Director uses these credentials to discover the vCenter Server and fetch the VM inventory details.

   • SSL Certificate—View the SSL certificate to authenticate the vCenter Server and select the Accept SSL Certificate option to accept the SSL certificate. To discover the vCenter Server, it is mandatory to accept the certificate.

8. Click Finish.

   The Summary page of configuration changes appears. Click OK to add the NSX Manager. When you return to the NSX Managers page, you will see the discovered NSX Manager listed, as shown in Figure 37.

   Figure 37: NSX Managers Page

   

After adding the NSX Manager, you must register the vSRX VM as a Juniper security service with the NSX Manager.

Procedure

1. Select the NSX Manager for which service needs to be registered, right-click or from the More list, select Register Security Service.

   The Register Security Service page appears, as shown in Figure 38.

   Figure 38: Register Security Service Page

   
2. In the Service Name field, enter the name of the Juniper security service.
3. From the vSRX OVF URL list, select the available vSRX OVF image that you copied to the Policy Enforcer machine.
4. In the vSRX Root Password field, enter the root password of the vSRX instance. The same root password will be set for all the vSRX instances deployed in NSX.
5. In the Description field, enter a description.
6. Click Register.

   A confirmation message indicates whether the registration is successful or not.

The vSRX instance registered as a new service in the vSphere Web Client environment. The vSRX is added as a network service that can be deployed by the NSX Manager.

• Click Networking & Security and then click Service Definitions. Click the Services tab and verify that <service-name> v1.0 is listed in the table (the newly registered vSRX VM) along with the Security Director as the Service Manager, as shown in Figure 39.

  Figure 39: Service Definitions Page

  

• Click the Service Managers tab and verify that the Security Director is listed with a status of In Service, as shown in Figure 40.

  Figure 40: vSphere Web Client Service Manager Page

  

The NSX Manager and its inventory are now synchronized with the Security Director. All shared objects (such as security groups) are synchronized between the NSX Manager and Security Director. The shared objects include the IP addresses of all VMs in ESXi hosts, including the vSRX agent VMs. Security Director creates a dynamic address group(DAG) for each security group synchronized from the NSX Manager, along with the addresses of each member of the security group.

After you register a Juniper security service in the NSX Manager, the NSX Manager uses the vSRX agent VM to communicate the service status. The NSX Manager transmits messages to the Security Director when any changes or activities are happening in the NSX Manager that are related to the Juniper security service.

Deploying vSRX as a Security Service on a vSphere Cluster (VMware vCenter Server)

The next step is to deploy the Juniper security service on a vSphere cluster. You perform this action as a new service deployment, selecting the Juniper security service and the specific vSphere cluster on which you want the vSRX agent VM deployed.

Before you deploy the vSRX agent VM as a security service on the vSphere cluster, you must create a static IP pool with a primary DNS for the vSRX. To create the static IP pool:

Procedure

1. From the vSphere Web Client, select Networking & Security and then NSX Managers.
2. In the Navigator column, select the name of the NSX Manager and click Manage > Grouping Objects > IP Pools.
3. Click the Add icon (+) to add the static IP pool.

   The Add Static IP Pool page appears, as shown in Figure 41.

   Figure 41: Add Static IP Pool Page

   
4. In the Name field, provide a name for the IP pool.
5. In the Gateway field, provide a default gateway IP address.
6. In the Prefix Length field, provide a prefix length of the DNS.
7. Provide the primary and secondary DNS and the DNS suffix . This is a mandatory field.
8. In the Static IP Pool field, provide the IP address ranges to be included in the pool.
9. Click OK.

   A new IP pool is created for the vSRX to be deployed.

Procedure

1. From the vSphere Web Client, click Networking & Security and then click Installation.

   The Installation page appears.

2. Click the Service Deployments tab and then click the New Service Deployment (+) icon. The Deploy Network & Security Services page appears, as shown in Figure 42.

   Figure 42: Deploy Network and Security Services Page

   
3. From the Select services & schedule page, select <service-name> v1.0 as the service to deploy and then click Next.
4. From the Select clusters page, select the data center and one or more clusters on which the vSRX agent VM is to be deployed, and then click Next.
5. From the Select storage and Management Network page:

   • Select the datastore on which to allocate shared storage for the vSRX agent VM, as shown in Figure 43. ESXi hosts should be configured so that they can access shared storage. If you select Specified on-host, ensure that the datastore for the ESXi host is specified in the Agent VM Settings of the ESXi host in the cluster. See the VMware documentation for details.

     Figure 43: Select Storage and Management Network Page

     

   • Select the network that you intend to use for traffic to the vSRX agent VM. If you select Specified on-host, ensure that the network to be used is specified in the Agent VM Settings > Network property of the ESXi host in the cluster. See the VMware documentation for details.

   Note The datastore and network must be configured for each ESXi host in the cluster.

   For IP assignment, you can choose an IP pool to assign a range of IP addresses from a selected static IP pool or create a new static IP pool.

6. Click Next to access the Ready to complete page, and then click Finish to publish the changes and deploy the vSRX agent VM security services to the specified cluster. From the Service Deployments tab, you will see that the Juniper security service has been successfully deployed on the selected vSphere cluster.
7. From the vSphere Web Client, click Hosts and Clusters and verify that vSRX agent VMs are listed as service-name v1.0 in the vSphere Web Client inventory and created for each ESXi host in the vSphere cluster.

   Note service-name is the name provided at the time of service registration.

8. The Security Director automatically discovers all the deployed vSRX VM agents by using the device-initiated discovery. A new firewall and IPS group policies are created and all devices are assigned to these group policies.

   Note The Security Director creates predefined IPS policies with a single IPS template. You can either add more IPS templates or convert the predefined IPS policies to custom IPS policies.

When you add an ESXi host in the vSphere cluster, NSX Manager automatically detects that the new ESXi host and adds the Juniper security service vSRX agent VM for it.

Verifying vSRX Agent VM Deployment in Security Director

In the Security Director, based on the NSX Manager discovery, NSX security groups are automatically synchronized with Security Director. For each service group in NSX Manager, Security Director creates a corresponding dynamic address group.

Procedure

1. Select Security Director > Devices > NSX Managers.

   The NSX Managers page appears with the discovered NSX Manager and the vSRX instance registered as a new service in the vSphere Web Client environment.

2. Select Security Director > Monitor > NSX Inventory > Security Groups.

   The Security Groups page appears listing all the security groups obtained from NSX and the corresponding dynamic address groups created by the Security Director, as shown in Figure 44.

   Figure 44: Security Groups Page

   
3. Select Security Director > Monitor > vCenter Server Inventory > Virtual Machines.

   The Virtual Machines page appears, listing the VMs that are dynamically fetched by the associated vCenter, as shown in Figure 45. You can view the security groups associated with each VM. Also, you can view security groups associated with each VM.

   Figure 45: Virtual Machines Page

   

Automatic Creation of Security Policy in the NSX Environment to Direct Traffic Through the vSRX Agent VMs (VMware vCenter Server)

After you deploy vSRX agent VM security services to the ESXi hosts in a vSphere cluster, security policies are automatically created to redirect any network traffic originating from the VMs in a specific security group to the Juniper security service vSRX agent VM residing in the ESXi host for further analysis.

Procedure

1. In the Security Director, install the IPS signature to all the vSRX VM agents.
2. On the Firewall and IPS Policies page, add new rules to the automatically created firewall or IPS policies with respective dynamic address groups, as shown in Figure 46. You can also use the application firewalls in the firewall rules.

   Figure 46: Firewall Policy Rules Page

   
3. After creating policy rules, publish and update the firewall and IPS policies.
4. After the firewall and IPS policies are successfully updated in the Security Director, log in to the vSphere Web Client to verify the security policies in NSX Manager.

   Select Network & Security > NSX Managers, and the Navigator column, select the NSX Manager name. The security policies are automatically created in NSX Manager by Security Director, as shown Figure 47.

   Figure 47: NSX Security Groups Page

   
5. From the vSphere Web Client, select Networking & Security and then select Firewall.

   The Firewall page appears.

6. In the right pane, select the Partner Security Services tab to view the complete list of automatically created security policies from the Security Director, as shown in Figure 48.

   Figure 48: Firewall Page

   
7. The corresponding traffic now goes through the vSRX VM agent.

When you return to Security Director > Devices > Security Devices, you can view the active configuration for the vSRX agent VMs, as shown in Figure 49.

Figure 49: Security Devices Page

The NSX Manager is aware of the security groups that the Juniper security service monitors. If any changes occur in the security group, the NSX Manager notifies the Security Director about those changes. If membership changes, the NSX Manager notifies the Security Director of the changes and the Security Director updates its database based on the new membership.