Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Table of Contents

Command Line Considerations

System Commands

Syslog Commands

To view help
To read current configured settings
To set syslog to output to a specific destination and enable
To disable syslog

SNMP Commands

To view SNMP help output
To view current system configuration for SNMP
To enable SNMP to allow access from any IP address
To disable SNMP

SNMP Traps Commands

To view SNMPTrap configuration help
To read current SNMPTrap configuration
To enable SNMPTraps to be sent to specific Trap receiver.
To disable SNMP

To view SNMP Trap configuration help
To read current SNMPTrap configuration
To enable SNMPTraps to be sent to specific Trap receiver
To disable SNMP

To view NTP configuration help
To read current NTP configuration
To enable NTP for specific server
To Disable NTP

Virtual IP Configuration

To view configured Virtual IP addresses (with expected output after reboot)
To delete a Virtual IP address

Bundle Configuration Commands

To add a bundle, define bundle number and type
To configure a bundle
To configure remote IP address
To configure remote cid and local cid
To Configure packet size (in bytes)
To configure buffer min/set/max (in milliseconds)
To configure the Time to Live in the IP packet (range 0-255)
To Configure the IP TOS byte in the IP packet (range 0-255)
To configure the IP TOS byte in the OAM packet (range 0-255)
To configure the OAM packet settings
To configure the port associated with the bundle
To configure the port interface type
To configure the port interface mode (DCE or DTE)
To configure the port interface encoding
To configure the port interface encoding
To configure the port interface speed
To configure the port interface clocking
To configure port Y-cable redundancy
To configure port high TT checking only
To configure bundle for direct drive

Bundle State Commands

To activate bundle
To disable bundle
To delete bundle
To recenter a buffer for bundle

Bundle Statistics Commands

To show bundle statistics
To clear port statistics

Port Statistics Commands

To query all on a port
To clear port statistics

Port Diagnostic Commands

To set serial loops on ports
To query serial loops on ports
To set BERTs on ports
To query BERT status on port:

Node Reference Commands

To display node summary
To configure node for external reference source
To configure node for external reference rate

Node Summary Commands

Unresolved xref
To get a summary of all cards installed
To get a summary of all daughter cards installed
To get a summary of all ports
To get a summary of all bundles

Viewing the Current TACACS+ Configuration

Set Reclock RD to allign RD/RT

Unresolved xref

Ethernet Autoswitch Configuration

Configuring Ethernet Autoswitch From the CLI

Working with syscfg
Accessing help for a Particular Utility
Viewing the Current NTP Configuration
Activating NTP on a CTP to a server