Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring DS0 Time Slots for CESoPSN Bundles (CTPView)

 

This topic describes how to configure the DS0 time slots used by the bundle. By default, all unused DS0s are attached to a bundle. An unused DS0 is a DS0 not assigned to another bundle.

Before you begin:

  • Log in to the CTPView software at least at the Net_Admin level.

  • Connect the CTPView server to the CTP device for which you want to configure bundles.

To configure time slots for CESoPSN bundles using CTPView:

  1. In the side pane, select Bundle > Configuration.
  2. Run your mouse over the Display and Select an Existing Bundle bar.
  3. In the table of bundles, select the bundle that you want to modify.
  4. Under Bundle Options, configure the parameters described in Table 15, and click Click to Submit Bundle AND Port Changes.

Table 15: CESoPSN Bundle DS0 Time Slot Settings in CTPView

FieldFunctionYour Action

Time Slots [ Selected are green. ]

Specifies the time slots that are assigned to the bundle.

The number of time slots that you select affects the default packet size and packet buffer set size for the bundle.

Click on a time slot to select it for the bundle. Green time slots are selected. Gray time slots are not selected.