示例：使用单宿主 EVPN 配置 PBB
此示例说明如何将提供商骨干网桥接 （PBB） 与以太网 VPN （EVPN） 集成。通过这种集成，核心中的控制平面操作得到简化，提供比常规 EVPN 更快的融合和可扩展性增强。PBB-EVPN 应用包括数据中心互连 （DCI） 和运营商以太网 E-LAN 服务。
要求
此示例使用以下硬件和软件组件：
-
三个提供商边缘 （PE） 设备，每个设备连接到单宿主客户站点。
-
四个客户边缘 （客户边缘） 设备，与 PE 设备单宿主机。
-
在所有 PE 路由器上运行 Junos OS 17.2R1 或更高版本。
开始之前：
-
配置设备接口。
-
在所有 PE 设备上配置 IGP，例如 OSPF。
-
在 PE 设备之间建立内部 BGP 会话。
-
在 PE 设备上启用 RSVP。
-
配置 PE 设备之间的 MPLS 和标签交换路径 （LSP）。
概述和拓扑
随着 PBB 与 EVPN 集成功能的引入，PBB 与以太网 VPN （EVPN） 集成，从而大幅减少了跨核心的控制平面学习，从而允许大量的第 2 层服务（例如数据中心连接）以简化的方式在网络中传输。请参阅功能浏览器中的将 PBB 与 EVPN 集成条目，了解“将 PBB 与 EVPN 集成”功能的平台和软件版本支持。
在 PBB-EVPN 网络中，PBB 核心中的骨干核心网桥 （BCB） 设备由 MPLS 取代，同时保留 PBB 骨干边缘网桥 （BEB） 的服务扩展属性。B 组件（提供商路由实例）使用 EVPN BGP 信令发出信号，并使用提供商边缘 （PE） 和提供商 （P） 设备封装在 MPLS 中。因此，PBB-EVPN 将 PBB 的巨大扩展特性与传统基本 MPLS 核心网络的简单性相结合，与常规 PBB 相比，显著减少了网络范围内的状态信息量。
图 1：具有单宿主 EVPN
的 PBB
的 PBB
在 图 1 中，PBB 与 EVPN 集成，其中客户边缘设备单宿主至设备 PE1、PE2 和 PE3。
配置
CLI 快速配置
要快速配置此示例，请复制以下命令，将其粘贴到文本文件中，删除所有换行符，更改详细信息，以便与网络配置匹配，将命令复制并粘贴到层次结构级别的 [edit] CLI 中，然后从配置模式进入。commit
PE1
set chassis aggregated-devices ethernet device-count 16
set chassis network-services enhanced-ip
set interfaces xe-1/0/0 flexible-vlan-tagging
set interfaces xe-1/0/0 encapsulation flexible-ethernet-services
set interfaces xe-1/0/0 unit 0 encapsulation vlan-bridge
set interfaces xe-1/0/0 unit 0 vlan-id 10
set interfaces xe-1/0/0 unit 1 encapsulation vlan-bridge
set interfaces xe-1/0/0 unit 1 vlan-id 20
set interfaces xe-1/2/2 flexible-vlan-tagging
set interfaces xe-1/2/2 encapsulation flexible-ethernet-services
set interfaces xe-1/2/2 unit 0 encapsulation vlan-bridge
set interfaces xe-1/2/2 unit 0 vlan-id 10
set interfaces xe-1/2/2 unit 0 family bridge filter input BRI
set interfaces xe-1/2/2 unit 1 encapsulation vlan-bridge
set interfaces xe-1/2/2 unit 1 vlan-id 20
set interfaces xe-1/2/2 unit 2 encapsulation vlan-bridge
set interfaces xe-1/2/2 unit 2 vlan-id 11
set interfaces xe-1/2/2 unit 2 family bridge
set interfaces xe-1/2/2 unit 3 encapsulation vlan-bridge
set interfaces xe-1/2/2 unit 3 vlan-id 21
set interfaces xe-1/2/2 unit 3 family bridge
set interfaces ge-2/1/0 gigether-options 802.3ad ae6
set interfaces ge-2/1/1 unit 0 family inet address 10.0.0.1/8
set interfaces ge-2/1/1 unit 0 family iso
set interfaces ge-2/1/1 unit 0 family mpls
set interfaces ae6 encapsulation ethernet-bridge
set interfaces ae6 unit 0 family bridge
set interfaces cbp0 unit 0 family bridge interface-mode trunk
set interfaces cbp0 unit 0 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 0 family bridge isid-list all
set interfaces cbp0 unit 1 family bridge interface-mode trunk
set interfaces cbp0 unit 1 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 1 family bridge isid-list all
set interfaces irb unit 0 family inet address 10.0.0.1/8
set interfaces irb unit 0 family iso
set interfaces irb unit 0 family mpls
set interfaces lo0 unit 0 family inet address 127.0.0.1/8 primary
set interfaces pip0 unit 0 family bridge interface-mode trunk
set interfaces pip0 unit 0 family bridge bridge-domain-type svlan
set interfaces pip0 unit 0 family bridge isid-list all-service-groups
set interfaces pip0 unit 1 family bridge interface-mode trunk
set interfaces pip0 unit 1 family bridge bridge-domain-type svlan
set interfaces pip0 unit 1 family bridge isid-list all-service-groups
set routing-options router-id 127.0.0.1
set routing-options autonomous-system 65221
set protocols rsvp interface all
set protocols rsvp interface fxp0.0 disable
set protocols mpls label-switched-path PE1toPE2 from 127.0.0.1
set protocols mpls label-switched-path PE1toPE2 to 127.0.0.2
set protocols mpls label-switched-path PE1toPE3 from 127.0.0.1
set protocols mpls label-switched-path PE1toPE3 to 127.0.0.3
set protocols mpls interface all
set protocols mpls interface fxp0.0 disable
set protocols bgp group ibgp type internal
set protocols bgp group ibgp local-address 127.0.0.1
set protocols bgp group ibgp family evpn signaling
set protocols bgp group ibgp neighbor 127.0.0.2
set protocols bgp group ibgp neighbor 127.0.0.3
set protocols ospf traffic-engineering
set protocols ospf area 0.0.0.0 interface all
set protocols ospf area 0.0.0.0 interface fxp0.0 disable
set routing-instances pbbn1 instance-type virtual-switch
set routing-instances pbbn1 interface cbp0.0
set routing-instances pbbn1 route-distinguisher 127.0.0.1:100
set routing-instances pbbn1 vrf-target target:100:100
set routing-instances pbbn1 protocols evpn pbb-evpn-core
set routing-instances pbbn1 protocols evpn extended-isid-list 1000
set routing-instances pbbn1 protocols evpn extended-isid-list 2000
set routing-instances pbbn1 bridge-domains bda vlan-id 100
set routing-instances pbbn1 bridge-domains bda isid-list 1000
set routing-instances pbbn1 bridge-domains bda vlan-id-scope-local
set routing-instances pbbn1 bridge-domains bdb vlan-id 200
set routing-instances pbbn1 bridge-domains bdb isid-list 2000
set routing-instances pbbn1 bridge-domains bdb vlan-id-scope-local
set routing-instances pbn1 instance-type virtual-switch
set routing-instances pbn1 interface pip0.0
set routing-instances pbn1 bridge-domains bda domain-type bridge
set routing-instances pbn1 bridge-domains bda vlan-id 10
set routing-instances pbn1 bridge-domains bda interface xe-1/2/2.0
set routing-instances pbn1 bridge-domains bda interface xe-1/0/0.0
set routing-instances pbn1 bridge-domains bdb domain-type bridge
set routing-instances pbn1 bridge-domains bdb vlan-id 20
set routing-instances pbn1 bridge-domains bdb interface xe-1/2/2.1
set routing-instances pbn1 bridge-domains bdb interface xe-1/0/0.1
set routing-instances pbn1 bridge-domains bdc domain-type bridge
set routing-instances pbn1 bridge-domains bdc vlan-id 11
set routing-instances pbn1 bridge-domains bdc interface xe-1/2/2.2
set routing-instances pbn1 bridge-domains bdd domain-type bridge
set routing-instances pbn1 bridge-domains bdd vlan-id 21
set routing-instances pbn1 bridge-domains bdd interface xe-1/2/2.3
set routing-instances pbn1 pbb-options peer-instance pbbn1
set routing-instances pbn1 service-groups sga service-type elan
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 10
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 11
set routing-instances pbn1 service-groups sga pbb-service-options source-bmac 00:50:50:50:50:50
set routing-instances pbn1 service-groups sgb service-type elan
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 20
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 21
set bridge-domains bd vlan-id none
set bridge-domains bd interface ae6.0
set bridge-domains bd routing-interface irb.0
PE2
set chassis aggregated-devices ethernet device-count 3
set chassis network-services enhanced-ip
set interfaces xe-0/0/0 flexible-vlan-tagging
set interfaces xe-0/0/0 encapsulation flexible-ethernet-services
set interfaces xe-0/0/0 unit 0 encapsulation vlan-bridge
set interfaces xe-0/0/0 unit 0 vlan-id 10
set interfaces xe-0/0/0 unit 1 encapsulation vlan-bridge
set interfaces xe-0/0/0 unit 1 vlan-id 20
set interfaces xe-0/0/0 unit 2 encapsulation vlan-bridge
set interfaces xe-0/0/0 unit 2 vlan-id 11
set interfaces xe-0/0/0 unit 2 family bridge
set interfaces xe-0/0/0 unit 3 encapsulation vlan-bridge
set interfaces xe-0/0/0 unit 3 vlan-id 21
set interfaces xe-0/0/0 unit 3 family bridge
set interfaces ge-0/2/1 unit 0 family inet address 172.16.0.1/16
set interfaces ge-0/2/1 unit 0 family mpls
set interfaces ge-0/2/9 gigether-options 802.3ad ae6
set interfaces ae6 encapsulation ethernet-bridge
set interfaces ae6 unit 0 family bridge
set interfaces cbp0 unit 0 family bridge interface-mode trunk
set interfaces cbp0 unit 0 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 0 family bridge isid-list all
set interfaces cbp0 unit 1 family bridge interface-mode trunk
set interfaces cbp0 unit 1 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 1 family bridge isid-list all
set interfaces irb unit 0 family inet address 10.0.0.2/8
set interfaces irb unit 0 family mpls
set interfaces lo0 unit 0 family inet address 127.0.0.2/8 primary
set interfaces pip0 unit 0 family bridge interface-mode trunk
set interfaces pip0 unit 0 family bridge bridge-domain-type svlan
set interfaces pip0 unit 0 family bridge isid-list all-service-groups
set interfaces pip0 unit 1 family bridge interface-mode trunk
set interfaces pip0 unit 1 family bridge bridge-domain-type svlan
set interfaces pip0 unit 1 family bridge isid-list all-service-groups
set routing-options router-id 127.0.0.2
set routing-options autonomous-system 65221
set protocols rsvp interface all
set protocols rsvp interface fxp0.0 disable
set protocols mpls label-switched-path PE2toPE1 from 127.0.0.2
set protocols mpls label-switched-path PE2toPE1 to 127.0.0.1
set protocols mpls label-switched-path PE2toPE3 from 127.0.0.2
set protocols mpls label-switched-path PE2toPE3 to 127.0.0.3
set protocols mpls interface all
set protocols mpls interface fxp0.0 disable
set protocols bgp group ibgp type internal
set protocols bgp group ibgp local-address 127.0.0.2
set protocols bgp group ibgp family evpn signaling
set protocols bgp group ibgp neighbor 127.0.0.1
set protocols bgp group ibgp neighbor 127.0.0.3
set protocols ospf traffic-engineering
set protocols ospf area 0.0.0.0 interface all
set protocols ospf area 0.0.0.0 interface fxp0.0 disable
set routing-instances pbbn1 instance-type virtual-switch
set routing-instances pbbn1 interface cbp0.0
set routing-instances pbbn1 route-distinguisher 127.0.0.2:100
set routing-instances pbbn1 vrf-target target:100:100
set routing-instances pbbn1 protocols evpn pbb-evpn-core
set routing-instances pbbn1 protocols evpn extended-isid-list 1000
set routing-instances pbbn1 protocols evpn extended-isid-list 2000
set routing-instances pbbn1 bridge-domains bda vlan-id 100
set routing-instances pbbn1 bridge-domains bda isid-list 1000
set routing-instances pbbn1 bridge-domains bda vlan-id-scope-local
set routing-instances pbbn1 bridge-domains bdb vlan-id 200
set routing-instances pbbn1 bridge-domains bdb isid-list 2000
set routing-instances pbbn1 bridge-domains bdb vlan-id-scope-local
set routing-instances pbn1 instance-type virtual-switch
set routing-instances pbn1 interface pip0.0
set routing-instances pbn1 bridge-domains bda domain-type bridge
set routing-instances pbn1 bridge-domains bda vlan-id 10
set routing-instances pbn1 bridge-domains bda interface xe-0/0/0.0
set routing-instances pbn1 bridge-domains bdb domain-type bridge
set routing-instances pbn1 bridge-domains bdb vlan-id 20
set routing-instances pbn1 bridge-domains bdb interface xe-0/0/0.1
set routing-instances pbn1 bridge-domains bdc domain-type bridge
set routing-instances pbn1 bridge-domains bdc vlan-id 11
set routing-instances pbn1 bridge-domains bdc interface xe-0/0/0.2
set routing-instances pbn1 bridge-domains bdd domain-type bridge
set routing-instances pbn1 bridge-domains bdd vlan-id 21
set routing-instances pbn1 bridge-domains bdd interface xe-0/0/0.3
set routing-instances pbn1 pbb-options peer-instance pbbn1
set routing-instances pbn1 service-groups sga service-type elan
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 10
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 11
set routing-instances pbn1 service-groups sga pbb-service-options source-bmac 00:51:51:51:51:51
set routing-instances pbn1 service-groups sgb service-type elan
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 20
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 21
set bridge-domains bd vlan-id none
set bridge-domains bd interface ae6.0
set bridge-domains bd routing-interface irb.0
PE3
set chassis aggregated-devices ethernet device-count 16
set chassis network-services enhanced-ip
set interfaces xe-0/0/3 flexible-vlan-tagging
set interfaces xe-0/0/3 encapsulation flexible-ethernet-services
set interfaces xe-0/0/3 unit 0 encapsulation vlan-bridge
set interfaces xe-0/0/3 unit 0 vlan-id 10
set interfaces xe-0/0/3 unit 1 encapsulation vlan-bridge
set interfaces xe-0/0/3 unit 1 vlan-id 20
set interfaces xe-0/0/3 unit 2 encapsulation vlan-bridge
set interfaces xe-0/0/3 unit 2 vlan-id 11
set interfaces xe-0/0/3 unit 2 family bridge
set interfaces xe-0/0/3 unit 3 encapsulation vlan-bridge
set interfaces xe-0/0/3 unit 3 vlan-id 21
set interfaces xe-0/0/3 unit 3 family bridge
set interfaces ge-1/0/6 unit 0 family inet address 172.17.0.1/16
set interfaces ge-1/0/6 unit 0 family mpls
set interfaces ge-1/1/4 unit 0 family inet address 172.16.0.2/16
set interfaces ge-1/1/4 unit 0 family mpls
set interfaces cbp0 unit 0 family bridge interface-mode trunk
set interfaces cbp0 unit 0 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 0 family bridge isid-list all
set interfaces cbp0 unit 1 family bridge interface-mode trunk
set interfaces cbp0 unit 1 family bridge bridge-domain-type bvlan
set interfaces cbp0 unit 1 family bridge isid-list all
set interfaces lo0 unit 0 family inet address 127.0.0.3/8 primary
set interfaces pip0 unit 0 family bridge interface-mode trunk
set interfaces pip0 unit 0 family bridge bridge-domain-type svlan
set interfaces pip0 unit 0 family bridge isid-list all-service-groups
set interfaces pip0 unit 1 family bridge interface-mode trunk
set interfaces pip0 unit 1 family bridge bridge-domain-type svlan
set interfaces pip0 unit 1 family bridge isid-list all-service-groups
set routing-options router-id 127.0.0.3
set routing-options autonomous-system 65221
set protocols rsvp interface all
set protocols rsvp interface fxp0.0 disable
set protocols mpls label-switched-path PE3toPE1 from 127.0.0.3
set protocols mpls label-switched-path PE3toPE1 to 127.0.0.1
set protocols mpls label-switched-path PE3toPE2 from 127.0.0.3
set protocols mpls label-switched-path PE3toPE2 to 127.0.0.2
set protocols mpls interface all
set protocols mpls interface fxp0.0 disable
set protocols bgp group ibgp type internal
set protocols bgp group ibgp local-address 127.0.0.3
set protocols bgp group ibgp family evpn signaling
set protocols bgp group ibgp neighbor 127.0.0.1
set protocols bgp group ibgp neighbor 127.0.0.2
set protocols ospf traffic-engineering
set protocols ospf area 0.0.0.0 interface all
set protocols ospf area 0.0.0.0 interface fxp0.0 disable
set routing-instances pbbn1 instance-type virtual-switch
set routing-instances pbbn1 interface cbp0.0
set routing-instances pbbn1 route-distinguisher 127.0.0.3:100
set routing-instances pbbn1 vrf-target target:100:100
set routing-instances pbbn1 protocols evpn pbb-evpn-core
set routing-instances pbbn1 protocols evpn extended-isid-list 1000
set routing-instances pbbn1 protocols evpn extended-isid-list 2000
set routing-instances pbbn1 bridge-domains bda vlan-id 100
set routing-instances pbbn1 bridge-domains bda isid-list 1000
set routing-instances pbbn1 bridge-domains bda vlan-id-scope-local
set routing-instances pbbn1 bridge-domains bdb vlan-id 200
set routing-instances pbbn1 bridge-domains bdb isid-list 2000
set routing-instances pbbn1 bridge-domains bdb vlan-id-scope-local
set routing-instances pbn1 instance-type virtual-switch
set routing-instances pbn1 interface pip0.0
set routing-instances pbn1 bridge-domains bda domain-type bridge
set routing-instances pbn1 bridge-domains bda vlan-id 10
set routing-instances pbn1 bridge-domains bda interface xe-0/0/3.0
set routing-instances pbn1 bridge-domains bdb domain-type bridge
set routing-instances pbn1 bridge-domains bdb vlan-id 20
set routing-instances pbn1 bridge-domains bdb interface xe-0/0/3.1
set routing-instances pbn1 bridge-domains bdc domain-type bridge
set routing-instances pbn1 bridge-domains bdc vlan-id 11
set routing-instances pbn1 bridge-domains bdc interface xe-0/0/3.2
set routing-instances pbn1 bridge-domains bdd domain-type bridge
set routing-instances pbn1 bridge-domains bdd vlan-id 21
set routing-instances pbn1 bridge-domains bdd interface xe-0/0/3.3
set routing-instances pbn1 pbb-options peer-instance pbbn1
set routing-instances pbn1 service-groups sga service-type elan
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 10
set routing-instances pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 11
set routing-instances pbn1 service-groups sga pbb-service-options source-bmac 00:52:52:52:52:52
set routing-instances pbn1 service-groups sgb service-type elan
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 20
set routing-instances pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 21
过程
分步程序
下面的示例要求您在各个配置层级中进行导航。有关导航 CLI 的信息，请参阅《CLI 用户指南》中的在配置模式下使用 CLI 编辑器。
要配置设备 PE1：
-
设置设备 PE1 上的聚合以太网接口数量。
[edit chassis] user@PE1# set aggregated-devices ethernet device-count 16 -
将设备 PE1 的网络服务设置为增强型互联网协议并使用增强型模式功能。
[edit chassis] user@PE1# set chassis network-services enhanced-ip -
配置设备 PE1 面向客户边缘的接口。
[edit interfaces] user@PE1# set xe-1/0/0 flexible-vlan-tagging user@PE1# set xe-1/0/0 encapsulation flexible-ethernet-services user@PE1# set xe-1/0/0 unit 0 encapsulation vlan-bridge user@PE1# set xe-1/0/0 unit 0 vlan-id 10 user@PE1# set xe-1/0/0 unit 1 encapsulation vlan-bridge user@PE1# set xe-1/0/0 unit 1 vlan-id 20 user@PE1# set xe-1/2/2 flexible-vlan-tagging user@PE1# set xe-1/2/2 encapsulation flexible-ethernet-services user@PE1# set xe-1/2/2 unit 0 encapsulation vlan-bridge user@PE1# set xe-1/2/2 unit 0 vlan-id 10 user@PE1# set xe-1/2/2 unit 0 family bridge filter input BRI user@PE1# set xe-1/2/2 unit 1 encapsulation vlan-bridge user@PE1# set xe-1/2/2 unit 1 vlan-id 20 user@PE1# set xe-1/2/2 unit 2 encapsulation vlan-bridge user@PE1# set xe-1/2/2 unit 2 vlan-id 11 user@PE1# set xe-1/2/2 unit 2 family bridge user@PE1# set xe-1/2/2 unit 3 encapsulation vlan-bridge user@PE1# set xe-1/2/2 unit 3 vlan-id 21 user@PE1# set xe-1/2/2 unit 3 family bridge -
配置将设备 PE1 与其他 PE 设备连接起来的接口。
[edit interfaces] user@PE1# set ge-2/1/0 gigether-options 802.3ad ae6 user@PE1# set ge-2/1/1 unit 0 family inet address 10.0.0.1/8 user@PE1# set ge-2/1/1 unit 0 family iso user@PE1# set ge-2/1/1 unit 0 family mpls -
配置聚合以太网捆绑包 ae6。
[edit interfaces] user@PE1# set ae6 encapsulation ethernet-bridge user@PE1# set ae6 unit 0 family bridge -
配置设备 PE1 的环路接口。
[edit interfaces] user@PE1# set interfaces lo0 unit 0 family inet address 127.0.0.1/8 primary -
为设备 PE1 配置集成路由和桥接 （IRB） 接口。
[edit interfaces] user@PE1# set interfaces irb unit 0 family inet address 10.0.0.1/8 user@PE1# set interfaces irb unit 0 family iso user@PE1# set interfaces irb unit 0 family mpls -
在设备 PE1 上配置客户主干端口 （CBP） 接口。
[edit interfaces] user@PE1# set cbp0 unit 0 family bridge interface-mode trunk user@PE1# set cbp0 unit 0 family bridge bridge-domain-type bvlan user@PE1# set cbp0 unit 0 family bridge isid-list all user@PE1# set cbp0 unit 1 family bridge interface-mode trunk user@PE1# set cbp0 unit 1 family bridge bridge-domain-type bvlan user@PE1# set cbp0 unit 1 family bridge isid-list all -
在设备 PE1 上配置提供商实例端口 （PIP）。
[edit interfaces] user@PE1# set pip0 unit 0 family bridge interface-mode trunk user@PE1# set pip0 unit 0 family bridge bridge-domain-type svlan user@PE1# set pip0 unit 0 family bridge isid-list all-service-groups user@PE1# set pip0 unit 1 family bridge interface-mode trunk user@PE1# set pip0 unit 1 family bridge bridge-domain-type svlan user@PE1# set pip0 unit 1 family bridge isid-list all-service-groups -
为设备 PE1 配置路由器 ID 和自治系统编号。
[edit routing-options] user@PE1# set router-id 127.0.0.1 user@PE1# set autonomous-system 65221 -
在设备 PE1 的所有接口上配置 RSVP，管理接口除外。
[edit protocols] user@PE1# set rsvp interface all user@PE1# set rsvp interface fxp0.0 disable -
在设备 PE1 的所有接口上配置 MPLS，管理接口除外。
[edit protocols] user@PE1# set mpls interface all user@PE1# set mpls interface fxp0.0 disable -
配置从设备 PE1 到所有其他 PE 设备的 LSP。
[edit protocols] user@PE1# set mpls label-switched-path PE1toPE2 from 127.0.0.1 user@PE1# set mpls label-switched-path PE1toPE2 to 127.0.0.2 user@PE1# set mpls label-switched-path PE1toPE3 from 127.0.0.1 user@PE1# set mpls label-switched-path PE1toPE3 to 127.0.0.3 -
在家族 EVPN 下配置从设备 PE1 到所有其他 PE 设备的内部 BGP 会话。
[edit protocols] user@PE1# set bgp group ibgp type internal user@PE1# set bgp group ibgp local-address 127.0.0.1 user@PE1# set bgp group ibgp family evpn signaling user@PE1# set bgp group ibgp neighbor 127.0.0.2 user@PE1# set bgp group ibgp neighbor 127.0.0.3 -
在 PE1 设备的所有接口上配置 OSPF，管理接口除外。
[edit protocols] user@PE1# set ospf traffic-engineering user@PE1# set ospf area 0.0.0.0 interface all user@PE1# set ospf area 0.0.0.0 interface fxp0.0 disable -
在设备 PE1 上配置类型为虚拟交换机的客户路由实例（I 组件）。将 CBP 接口、路由识别符以及虚拟路由和转发 （VRF） 目标值分配给 PBBN 路由实例。
[edit routing-instances] user@PE1# set pbbn1 instance-type virtual-switch user@PE1# set pbbn1 interface cbp0.0 user@PE1# set pbbn1 route-distinguisher 127.0.0.1:100 user@PE1# set pbbn1 vrf-target target:100:100 -
从客户路由实例配置 PBB-EVPN 集成。将扩展 I-SID 列表和网桥域分配给路由实例。
[edit routing-instances] user@PE1# set pbbn1 protocols evpn pbb-evpn-core user@PE1# set pbbn1 protocols evpn extended-isid-list 1000 user@PE1# set pbbn1 protocols evpn extended-isid-list 2000 user@PE1# set pbbn1 bridge-domains bda vlan-id 100 user@PE1# set pbbn1 bridge-domains bda isid-list 1000 user@PE1# set pbbn1 bridge-domains bda vlan-id-scope-local user@PE1# set pbbn1 bridge-domains bdb vlan-id 200 user@PE1# set pbbn1 bridge-domains bdb isid-list 2000 user@PE1# set pbbn1 bridge-domains bdb vlan-id-scope-local -
在设备 PE1 上配置类型为虚拟交换机的提供商路由实例。将 PBP 接口和网桥域分配给路由实例。
[edit routing-instances] user@PE1# set pbn1 instance-type virtual-switch user@PE1# set pbn1 interface pip0.0 user@PE1# set pbn1 bridge-domains bda domain-type bridge user@PE1# set pbn1 bridge-domains bda vlan-id 10 user@PE1# set pbn1 bridge-domains bda interface xe-1/2/2.0 user@PE1# set pbn1 bridge-domains bda interface xe-1/0/0.0 user@PE1# set pbn1 bridge-domains bdb domain-type bridge user@PE1# set pbn1 bridge-domains bdb vlan-id 20 user@PE1# set pbn1 bridge-domains bdb interface xe-1/2/2.1 user@PE1# set pbn1 bridge-domains bdb interface xe-1/0/0.1 user@PE1# set pbn1 bridge-domains bdc domain-type bridge user@PE1# set pbn1 bridge-domains bdc vlan-id 11 user@PE1# set pbn1 bridge-domains bdc interface xe-1/2/2.2 user@PE1# set pbn1 bridge-domains bdd domain-type bridge user@PE1# set pbn1 bridge-domains bdd vlan-id 21 user@PE1# set pbn1 bridge-domains bdd interface xe-1/2/2.3 -
在客户路由实例中配置对等 PBBN 路由实例。
[edit routing-instances] user@PE1# set pbn1 pbb-options peer-instance pbbn1 -
配置客户路由实例中要支持的服务组。
[edit routing-instances] user@PE1# set pbn1 service-groups sga service-type elan user@PE1# set pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 10 user@PE1# set pbn1 service-groups sga pbb-service-options isid 1000 vlan-id-list 11 user@PE1# set pbn1 service-groups sga pbb-service-options source-bmac 00:50:50:50:50:50 user@PE1# set pbn1 service-groups sgb service-type elan user@PE1# set pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 20 user@PE1# set pbn1 service-groups sgb pbb-service-options isid 2000 vlan-id-list 21 -
在设备 PE1 上配置网桥域。
[edit bridge-domains] user@PE1# set bd vlan-id none user@PE1# set bd interface ae6.0 user@PE1# set bd routing-interface irb.0
结果
在配置模式下，输入 show chassis、 show interfaces、 show routing-instancesshow routing-optionsshow protocols、 和show bridge-domains命令以确认您的配置。如果输出未显示预期的配置，请重复此示例中的说明以更正配置。
user@PE1# show chassis
aggregated-devices {
ethernet {
device-count 16;
}
}
network-services enhanced-ip;
user@PE1# show interfaces
xe-1/0/0 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 10;
}
unit 1 {
encapsulation vlan-bridge;
vlan-id 20;
}
}
xe-1/2/2 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 10;
family bridge {
filter {
input BRI; ## reference 'BRI' not found
}
}
}
unit 1 {
encapsulation vlan-bridge;
vlan-id 20;
}
unit 2 {
encapsulation vlan-bridge;
vlan-id 11;
family bridge;
}
unit 3 {
encapsulation vlan-bridge;
vlan-id 21;
family bridge;
}
}
ge-2/1/0 {
gigether-options {
802.3ad ae6;
}
}
ge-2/1/1 {
unit 0 {
family inet {
address 10.0.0.1/8;
}
family iso;
family mpls;
}
}
ae6 {
encapsulation ethernet-bridge;
unit 0 {
family bridge;
}
}
cbp0 {
unit 0 {
family bridge {
interface-mode trunk;
bridge-domain-type bvlan;
isid-list all;
}
}
unit 1 {
family bridge {
interface-mode trunk;
bridge-domain-type bvlan;
isid-list all;
}
}
}
irb {
unit 0 {
family inet {
address 10.0.0.1/8;
}
family iso;
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 127.0.0.1/8 {
primary;
}
}
}
}
pip0 {
unit 0 {
family bridge {
interface-mode trunk;
bridge-domain-type svlan;
isid-list all-service-groups;
}
}
unit 1 {
family bridge {
interface-mode trunk;
bridge-domain-type svlan;
isid-list all-service-groups;
}
}
}
user@PE1# show routing-options router-id 127.0.0.1; autonomous-system 65221;
user@PE1# show protocols
rsvp {
interface all;
interface fxp0.0 {
disable;
}
}
mpls {
label-switched-path PE1toPE2 {
from 127.0.0.1;
to 127.0.0.2;
}
label-switched-path PE1toPE3 {
from 127.0.0.1;
to 127.0.0.3;
}
interface all;
interface fxp0.0 {
disable;
}
}
bgp {
group ibgp {
type internal;
local-address 127.0.0.1;
family evpn {
signaling;
}
neighbor 127.0.0.2;
neighbor 127.0.0.3;
}
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface all;
interface fxp0.0 {
disable;
}
}
}
user@PE1# show routing-instances
pbbn1 {
instance-type virtual-switch;
interface cbp0.0;
route-distinguisher 127.0.0.1:100;
vrf-target target:100:100;
protocols {
evpn {
pbb-evpn-core;
extended-isid-list [ 1000 2000 ];
}
}
bridge-domains {
bda {
vlan-id 100;
isid-list 1000;
vlan-id-scope-local;
}
bdb {
vlan-id 200;
isid-list 2000;
vlan-id-scope-local;
}
}
}
pbn1 {
instance-type virtual-switch;
interface pip0.0;
bridge-domains {
bda {
domain-type bridge;
vlan-id 10;
interface xe-1/2/2.0;
interface xe-1/0/0.0;
}
bdb {
domain-type bridge;
vlan-id 20;
interface xe-1/2/2.1;
interface xe-1/0/0.1;
}
bdc {
domain-type bridge;
vlan-id 11;
interface xe-1/2/2.2;
}
bdd {
domain-type bridge;
vlan-id 21;
interface xe-1/2/2.3;
}
}
pbb-options {
peer-instance pbbn1;
}
service-groups {
sga {
service-type elan;
pbb-service-options {
isid 1000 vlan-id-list [ 10 11 ];
source-bmac 00:50:50:50:50:50;
}
}
sgb {
service-type elan;
pbb-service-options {
isid 2000 vlan-id-list [ 20 21 ];
}
}
}
}
user@PE1# show bridge-domains
bd {
vlan-id none;
interface ae6.0;
routing-interface irb.0;
}
如果完成设备配置，请从配置模式进入。commit
验证
确认配置工作正常。
验证 BGP 对等状态
目的
验证是否在 PE 设备之间建立了 BGP 会话。
行动
在操作模式下，运行命令 show bgp summary 。
user@PE1> show bgp summary
Groups: 1 Peers: 2 Down peers: 0
Table Tot Paths Act Paths Suppressed History Damp State Pending
bgp.evpn.0
8 8 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
127.0.0.2 65221 9 7 0 0 2:09 Establ
bgp.evpn.0: 4/4/4/0
pbbn1.evpn.0: 4/4/4/0
__default_evpn__.evpn.0: 0/0/0/0
127.0.0.3 65221 7 7 0 0 1:25 Establ
bgp.evpn.0: 4/4/4/0
pbbn1.evpn.0: 4/4/4/0
__default_evpn__.evpn.0: 0/0/0/0
意义
PE 设备之间将建立 BGP 会话。
验证 MPLS LSP
目的
验证设备 PE1 上的 MPLS LSP 状态。
行动
在操作模式下，运行命令 show mpls lsp 。
user@PE1> show mpls lsp Ingress LSP: 2 sessions To From State Rt P ActivePath LSPname 127.0.0.2 127.0.0.1 Up 0 * PE1toPE2 127.0.0.3 127.0.0.1 Up 0 * PE1toPE3 Total 2 displayed, Up 2, Down 0 Egress LSP: 2 sessions To From State Rt Style Labelin Labelout LSPname 127.0.0.1 127.0.0.3 Up 0 1 FF 3 - PE3toPE1 127.0.0.1 127.0.0.2 Up 0 1 FF 3 - PE2toPE1 Total 2 displayed, Up 2, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
验证 EVPN 路由实例
目的
验证 EVPN 路由实例信息。
行动
在操作模式下，运行命令 show evpn instance extensive 。
user@PE1> show evpn instance extensive
Instance: __default_evpn__
Route Distinguisher: 127.0.0.1:0
Number of bridge domains: 0
Number of neighbors: 0
Instance: pbbn1
Route Distinguisher: 127.0.0.1:100
Per-instance MAC route label: 16
Per-instance multicast route label: 17
PBB EVPN Core enabled
Control word enabled
MAC database status Local Remote
MAC advertisements: 2 4
MAC+IP advertisements: 0 0
Default gateway MAC advertisements: 0 0
Number of local interfaces: 1 (1 up)
Interface name ESI Mode Status AC-Role
cbp0.0 00:00:00:00:00:00:00:00:00:00 single-homed Up Root
Number of IRB interfaces: 0 (0 up)
Number of bridge domains: 2
VLAN Domain ID Intfs / up IRB intf Mode MAC sync IM route label SG sync IM core nexthop
1000 0 0 Extended Enabled 17 Disabled
2000 0 0 Extended Enabled 17 Disabled
Number of Bundle bridge domains: 0
Number of neighbors: 2
Address MAC MAC+IP AD IM ES Leaf-label
127.0.0.2 2 0 0 2 0
127.0.0.3 2 0 0 2 0
Number of ethernet segments: 0
意义
输出显示 pbbn1 路由实例信息，如 PBB 与 EVPN 的集成、单宿主 EVPN 操作模式以及设备 PE2 和 PE3 的 IP 地址作为邻变量。
验证 EVPN 路由实例的路由表条目
目的
验证 EVPN 路由实例的路由表条目。
行动
在操作模式下，运行命令 show route table pbbn1.evpn.0 。
user@PE1> show route table pbbn1.evpn.0
pbbn1.evpn.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
2:127.0.0.1:100::1000::00:50:50:50:50:50/304 MAC/IP
*[EVPN/170] 00:04:20
Indirect
2:127.0.0.1:100::2000::00:1d:b5:a2:47:b0/304 MAC/IP
*[EVPN/170] 00:04:20
Indirect
2:127.0.0.2:100::1000::00:51:51:51:51:51/304 MAC/IP
*[BGP/170] 00:02:50, localpref 100, from 127.0.0.2
AS path: I, validation-state: unverified
> to 10.0.0.2 via irb.0, label-switched-path PE1toPE2
2:127.0.0.2:100::2000::00:23:9c:5e:a7:b0/304 MAC/IP
*[BGP/170] 00:02:50, localpref 100, from 127.0.0.2
AS path: I, validation-state: unverified
> to 10.0.0.2 via irb.0, label-switched-path PE1toPE2
2:127.0.0.3:100::1000::00:52:52:52:52:52/304 MAC/IP
*[BGP/170] 00:02:05, localpref 100, from 127.0.0.3
AS path: I, validation-state: unverified
> to 172.17.0.1 via ge-2/1/1.0, label-switched-path PE1toPE3
2:127.0.0.3:100::2000::5c:5e:ab:0d:3a:b8/304 MAC/IP
*[BGP/170] 00:02:05, localpref 100, from 127.0.0.3
AS path: I, validation-state: unverified
> to 172.17.0.1 via ge-2/1/1.0, label-switched-path PE1toPE3
3:127.0.0.1:100::1000::127.0.0.1/248 IM
*[EVPN/170] 00:04:20
Indirect
3:127.0.0.1:100::2000::127.0.0.1/248 IM
*[EVPN/170] 00:04:20
Indirect
3:127.0.0.2:100::1000::127.0.0.2/248 IM
*[BGP/170] 00:02:50, localpref 100, from 127.0.0.2
AS path: I, validation-state: unverified
> to 10.0.0.2 via irb.0, label-switched-path PE1toPE2
3:127.0.0.2:100::2000::127.0.0.2/248 IM
*[BGP/170] 00:02:50, localpref 100, from 127.0.0.2
AS path: I, validation-state: unverified
> to 10.0.0.2 via irb.0, label-switched-path PE1toPE2
3:127.0.0.3:100::1000::127.0.0.3/248 IM
*[BGP/170] 00:02:05, localpref 100, from 127.0.0.3
AS path: I, validation-state: unverified
> to 172.17.0.1 via ge-2/1/1.0, label-switched-path PE1toPE3
3:127.0.0.3:100::2000::127.0.0.3/248 IM
*[BGP/170] 00:02:05, localpref 100, from 127.0.0.3
AS path: I, validation-state: unverified
> to 172.17.0.1 via ge-2/1/1.0, label-switched-path PE1toPE3
意义
输出显示了在 PE 设备之间路由 LSP 的 IRB 矩阵的使用情况。
验证 EVPN 数据库
目的
验证 PE 设备上的 EVPN 数据库信息。
行动
在操作模式下，运行命令 show evpn database 。
user@PE1> show evpn database
Instance: pbbn1
VLAN DomainId MAC address Active source Timestamp IP address
2000 00:1d:b5:a2:47:b0 Local Apr 14 13:48:51
2000 00:23:9c:5e:a7:b0 127.0.0.2 Apr 14 13:53:04
2000 5c:5e:ab:0d:3a:b8 127.0.0.3 Apr 14 13:53:38
1000 00:50:50:50:50:50 Local Apr 14 13:48:51
1000 00:51:51:51:51:51 127.0.0.2 Apr 14 13:53:04
1000 00:52:52:52:52:52 127.0.0.3 Apr 14 13:53:38
user@PE2> show evpn database
Instance: pbbn1
VLAN DomainId MAC address Active source Timestamp IP address
2000 00:1d:b5:a2:47:b0 127.0.0.1 Apr 14 13:53:04
2000 00:23:9c:5e:a7:b0 Local Apr 14 13:48:46
2000 5c:5e:ab:0d:3a:b8 127.0.0.3 Apr 14 13:53:37
1000 00:50:50:50:50:50 127.0.0.1 Apr 14 13:53:04
1000 00:51:51:51:51:51 Local Apr 14 13:48:46
1000 00:52:52:52:52:52 127.0.0.3 Apr 14 13:53:37
user@PE3> show evpn database
Instance: pbbn1
VLAN DomainId MAC address Active source Timestamp IP address
1000 00:50:50:50:50:50 127.0.0.1 Apr 14 13:53:34
1000 00:51:51:51:51:51 127.0.0.2 Apr 14 13:53:27
1000 00:52:52:52:52:52 Local Apr 14 13:52:04
2000 00:1d:b5:a2:47:b0 127.0.0.1 Apr 14 13:53:34
2000 00:23:9c:5e:a7:b0 127.0.0.2 Apr 14 13:53:27
2000 5c:5e:ab:0d:3a:b8 Local
验证 MAC 表条目
目的
验证网桥 MAC 表条目。
行动
在操作模式下，运行命令 show bridge mac-table 。
user@PE1> show bridge mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
O -OVSDB MAC, SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC, P -Pinned MAC)
Routing instance : default-switch
Bridging domain : bd, VLAN : none
MAC MAC Logical NH MAC
address flags interface Index property
00:23:9c:5e:a7:f0 D ae6.0
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
O -OVSDB MAC, SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC, P -Pinned MAC)
Routing instance : pbbn1
Bridging domain : bda, VLAN : 100
MAC MAC Logical NH MAC
address flags interface Index property
00:51:51:51:51:51 DC 1048576
00:52:52:52:52:52 DC 1048581
01:1e:83:00:03:e8 DC 1048578
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
O -OVSDB MAC, SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC, P -Pinned MAC)
Routing instance : pbbn1
Bridging domain : bdb, VLAN : 200
MAC MAC Logical NH MAC
address flags interface Index property
00:23:9c:5e:a7:b0 DC 1048576
01:1e:83:00:07:d0 DC 1048577
5c:5e:ab:0d:3a:b8 DC 1048581
MAC flags (S -static MAC, D -dynamic MAC,
SE -Statistics enabled, NM -Non configured MAC, P -Pinned MAC)
Routing instance : pbn1
Bridging domain : bda, ISID : 1000, VLAN : 10
MAC MAC Logical Remote
address flags interface BEB address
00:00:00:00:0a:00 D xe-1/0/0.0
00:00:00:00:0a:01 D xe-1/0/0.0
00:00:00:00:0a:02 D xe-1/0/0.0
00:00:00:00:0a:03 D xe-1/0/0.0
00:00:00:00:0a:04 D xe-1/0/0.0
00:00:00:00:0a:05 D xe-1/0/0.0
00:00:00:00:0a:06 D xe-1/0/0.0
00:00:00:00:0a:07 D xe-1/0/0.0
00:00:00:00:0a:08 D xe-1/0/0.0
00:00:00:00:0a:09 D xe-1/0/0.0
意义
输出显示与聚合以太网捆绑包关联的 ae6 MAC 地址。
验证 inet.3 路由表条目
目的
验证设备 PE1 上的 inet.3 路由表条目。
行动
在操作模式下，运行命令 show route table inet.3 。
user@PE1> show route table inet.3
inet.3: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
127.0.0.2/8 *[RSVP/7/1] 00:11:15, metric 1
> to 10.0.0.2 via irb.0, label-switched-path PE1toPE2
127.0.0.3/8 *[RSVP/7/1] 00:09:48, metric 1
> to 172.17.0.1 via ge-2/1/1.0, label-switched-path PE1toPE3
意义
到 设备 PE2 和 PE3 的 LSP 使用 IRB 接口进行路由。