slave
MX Series
slave {
announce-interval announce-interval-value
announce-timeout announce-timeout-value;
delay-request delay-request-value;
frequency-only;
hybrid
interface interface-name {
unicast-mode {
transport ipv4;
clock-source ip-address {
local-ip-address local-ip-address {
}
}
multicast-mode {
{ hybrid
transport 802.3 link-local;
}
primary-asymmetry <primary-asymmetry-value>
secondary-asymmetry <secondary-asymmetry-value>
}
primary <primary-interface>
secondary <secondary-interface>
}
sync-interval interval;
}
QFX Series
slave {
interface interface-name {
unicast-mode {
transport ipv4;
clock-client ip-address {
local-ip-address local-ip-address;
}
}
}
multicast-mode {
transport (ipv4 | ieee-802.3)
local-ip-address local-ip-address;
local-priority local-ip-address;
}
max-announce-interval max-announce-interval;
max-delay-response-interval max-delay-response-interval;
max-sync-interval max-sync-interval;
min-announce-interval min-announce-interval;
min-delay-response-interval min-delay-response-interval;
min-sync-interval min-sync-interval;
sync-interval sync-interval;
}
ACX Series (ACX5448, ACX5448-D, and ACX5448-M)
slave {
announce-interval announce-interval-value
announce-timeout announce-timeout-value;
delay-request delay-request-value;
grant-duration;
interface interface-name {
unicast-mode {
transport [ipv4 | ipv6];
clock-source ip-address {
local-ip-address local-ip-address {
}
}
}
sync-interval interval;
}
Hierarchy Level
[edit protocols ptp]
Description
Configure the timeReceiver with parameters.
Multicast mode is not supported on the QFX Series, ACX5448, ACX5448-D, and ACX5448-M devices.
Options
| announce-interval |
Configure the logarithmic mean interval for the announce messages to be sent by the timeTransmitter.
|
| announce-timeout |
Specify the number of announce messages a timeReceiver must miss before an announce-timeout is declared.
|
| delay-request |
Configure the logarithmic mean interval in seconds between the delay request messages sent by the timeReceiver to the timeTransmitter. |
|
Specify the grant duration value for the announce messages.
|
|
| frequency-only |
Configure frequency synchronization. |
| hybrid |
Configure the timing and synchronization feature to operate in Sync-E assisted PTP mode of operation. |
| interface <interface-name> |
Interface on which to respond to upstream PTP timeTransmitter, or aggregated Ethernet ID. For example, interface ae0.0. |
| unicast-mode |
Configure the timeReceiver in unicast mode. |
| clock-source |
Configure the IP address of the timeTransmitter. |
| multicast-mode |
Configure multicast transmission of PTP packets between the timeTransmitter node and the timeReceiver node. |
| transport 802.3 |
Configure Ethernet as the encapsulation type for transport of PTP packets. |
| sync-interval |
Configure the logarithmic mean interval for sync interval messages to be sent by the timeTransmitter. |
| unicast-mode |
Configure the timeTransmitter in unicast mode. |
| clock-client |
Configure the IP address of the timeReceiver |
| transport |
Configure the encapsulation type for PTP packet transport. |
| timeTransmitter-asymmetry <timeTransmitter-asymmetry-value> |
Configure asymmetry for timeTransmitter link of the aggregated Ethernet bundle. (MX10004 Device) |
| secondary-asymmetry <secondary-asymmetry-value> |
Configure asymmetry for secondary link of the aggregated Ethernet bundle. (MX10004 Device) |
| primary <primary-interface> |
Configure primary interface name for the aggregated Ethernet bundle. (MX10004 Device) |
| secondary <secondary-interface> |
Configure primary interface name for the aggregated Ethernet bundle. (MX10004 Device) |
| local-ip-address |
Configure the IP address of the interface acting as the timeReceiver or the timeTransmitter. |
| local-priority |
Configure a clock’s local priority to be used as a tie-breaker in the dataset comparison algorithm, if all other attributes of the datasets being compared are equal. |
| max-announce-interval |
Configure the maximum log mean interval between announce messages. |
| max-delay-response-interval |
Configure the maximum log mean interval between delay-response messages. |
| max-sync-interval |
Configure the maximum log mean interval between synchronization messages. |
| min-announce-interval |
Configure the minimum log mean interval between announce messages. |
| min-delay-response-interval |
Configure the minimum log mean interval between delay-response messages. |
| min-sync-interval |
Configure the minimum log mean interval between synchronization messages. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.2.