disable-timeout
Syntax
disable-timeout seconds;
Hierarchy Level
[edit protocols layer2-control bpdu-block]
[edit ethernet-switching-options bpdu-block]
Description
For interfaces configured for BPDU protection, specify the amount of time an interface receiving BPDUs is disabled.
Configure the timeout value to periodically check to see if an interface is still disabled with BPDU blocking. If this option is not configured, the interface is not periodically checked and remains disabled.
Default
The disable timeout is not enabled.
Options
seconds——Amount of time, in seconds, the interface receiving BPDUs is disabled. Once the timeout expires, the interface is brought back into service.
Range: 10 through 3600
Default: If this option is not configured, the interface is not periodically checked and remains disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
system—To view this statement in the configuration.system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.1.