vpws-service-id
Syntax
vpws-service-id { local service-id; remote serivce-id; source-packet-routing { srv6; locator locator-name end-dx2-sid end-dx2-sid } }
Hierarchy Level
[edit routing-instance instance-type protocols evpn interface interface-name]
Description
Specify the local and remote Ethernet VPN (EVPN)-Virtual Private Wire Service (VPWS) service identifiers. These service identifiers are unique to an EVPN and are used to identify the endpoints of the EVPN-VPWS network. These endpoints are autodiscovered by BGP and are used to exchange the service labels (learned from the respective provider edge (PE) routers) that are used by autodiscovered routes per EVI route type. Depending on the mode of operation of the PE routers in the EVPN-VPWS network, these two endpoints of the can be colocated on the same PE router or on different PE routers.
Options
local |
Unique local VPWS service identifier of the EVPN-VPWS network. This identifies the logical interface of the PE router forwarding traffic to the PE router with a remote VPWS service identifier in the EVPN-VPWS network.
|
remote |
Unique remote VPWS service identifier of the EVPN-VPWS network. This identifies the logical interface of the PE router receiving the traffic from the PE router with a local VPWS service identifier in the EVPN-VPWS network.
|
srv6 | Enable segment routing over IPv6. |
locator locator-name | Specify a name to identify the locator. |
end-dx2-sid end-dx2-sid | Specify the SID to enable endpoint decapsulation of EVPN-VPWS Layer 2 cross connect circuit. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.1.
source-packet-routing
statement introduced in Junos OS Release
22.4R1.
locator
statement introduced in Junos OS Release 22.4R1.
end-dx2-sid
statement introduced in Junos OS Release 22.4R1.