Software release
|
Junos OS releases 14.1R4, 14.2R3 and Junos Continuity,
Junos OS release 15.1 and later.
Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC.
Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.
|
Description
|
80 Gbps capacity without hierarchical quality of service
(HQoS)
Requires high-capacity fan trays and high-capacity filter
trays
Weight: 15.96 lb (7.26 kg)
Model numbers: MPC2E-3D-NG
Name in the CLI: MPC2E NG PQ & Flex Q
Add-on license provides limited additional flexible queuing.
Note: MPC2E-3D-NG is not compatible with SCB, you must use either
SCBE-MX or SCBE2-MX for the switch fabric interface.
|
Hardware features
|
Line-rate throughput of up to 80 Gbps
Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY
mode at 10.31 Gbps
Two slots for MICs
Junos Trio chipsets for increased scaling for bandwidth,
subscribers, and services.
Note: MPC2E-3D-NG is not compatible with SCB, you must use either
SCBE-MX or SCBE2-MX for the switch fabric interface.
Note: MPC2E-3D-NG does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP,
MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP.
Note: The non-HQOS MPC3E NG and MPC2E NG MPCs support MIC-3D-8CHOC3-4CHOC12
and MIC-3D-4CHOC3-2CHOC12 only with a limited queuing license.
|
Software features
|
Chained composite next hops
Layer 3 VPN localization
Detection of Layer 2 loops
Entropy label support in mixed mode
SNMP and CLI support for Routing Engine memory monitoring
Mixed-mode LAG support on core interfaces
Dynamic power management for MICs
Support for flexible-queuing
|
Power requirement
|
Maximum with highest-power MICs at 55° C: 9.88 A
@ 48 V (474 W)
At different temperatures:
55° C: 474 W
40° C: 417 W
25° C: 400 W
|
LEDs
|
OK/FAIL LED, one bicolor:
|
