post-service-filter
Syntax
post-service-filter filter-name;
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number family inet service input], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet service input]
Description
Define the filter to be applied to traffic after service processing. The filter is applied only if a service set is configured and selected. You can configure a postservice filter on the input side of the interface only.
The post-service-filter
statement is not supported
when the service interface is on an MS-MIC or MS-MPC.
Options
filter-name
—Identifier
for the post-service filter.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.