Index


A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z


Numbers

10/100BASE-T port   1, 2

A

access, management   1, 2, 3
setting up console   1, 2
SNMP   1, 2
Telnet setup   1
accessing
an FTP server. See FTP access1, 2
Boot mode   1
Privileged Exec command mode   1, 2
software release file   1, 2, 3
access line modules   1
ACTIVITY LED   1
agency certification   1, 2
air flow   1
freestanding unit   1
rack-mounted installation and   1
specifications   1
amperage   1
antistatic bags and containers   1
ASIC and non-ASIC modules   1, 2
assigning an IP address   1, 2, 3, 4
audience for documentation   1

B

backing up software configuration   1, 2
BNC connectors, cabling   1
booting
LED activity   1
system   1, 2, 3
Boot mode software installation   1

C

cable-management bracket   1
cables
failure   1
I/O modules   1, 2
pinouts   1
power input module   1, 2
recommendations   1
redundant port   1
SRP I/O modules   1, 2
X.21/V.35   1
cabling
BNC connectors   1
HSSI connectors   1
RJ-45 connectors   1
RJ-48C connectors   1
SC duplex connectors   1, 2, 3
specifications for I/O modules   1, 2
SRP I/O modules   1, 2
CD, documentation CD   1
using the   1
certification   1, 2
circulation, air. See air flow1
classification, packet   1
CLI (command line interface)   1
clocking problems. See troubleshooting1
clock source input ports (SRP I/O modules)   1
combinations of line modules   1
command line interface. See CLI1
components, storing   1
configuration, software   1, 2
configuring
cables   1, 2, 3
FTP access. See FTP access1, 2
IP address. See assigning an IP address1, 2
management access   1, 2
Telnet   1
connecting console to ERX system   1
connectors
on I/O modules   1, 2
pinouts   1
console
cables, SRP I/O modules   1
for management access   1, 2
ports
10/100BASE-T   1, 2
RS-232   1, 2
consumption, power. See power1
conventions defined
icons   1
syntax   1
text   1
copying the software release file   1, 2, 3
current (electrical) requirements   1
customer support   1

D

DCE status   1
Declaration of Conformity, EC   1
detecting double-bit error   1
Device Management System, NMC-RX   1
diagnosing problems. See troubleshooting1
diagnostic LEDs   1, 2
dimensions of ERX system   1
dissipation, heat   1
distribution rack   1
documentation set, Juniper Networks   1
CD   1
CD, using the   1
comments on   1
double-bit errors
detecting   1
troubleshooting   1
DTE status   1

E

earth/ground connections   1
EC Declaration of Conformity   1
EIA distribution rack. See distribution rack1
electrical requirements   1
environmental requirements   1, 2
ERX-1400 model   1
See also ERX-1400 series1
See also ERX system1
ERX-1400 series   1, 2
fan tray   1
front view   1
installation
freestanding   1
rear view   1
slot identification and grouping   1
specifications   1, 2
unpacking   1
See also ERX system1
ERX-1440 model   1
See also ERX-1440 series1
See also ERX system1
ERX-700 model   1
See also ERX 700 series1
See also ERX system1
ERX-700 series   1, 2
fan tray   1
front view   1
installation
freestanding   1
rear view   1
slot identification and grouping   1
specifications   1, 2
unpacking   1
See also ERX system1
ERX-705 model   1
See also ERX 700 series1
See also ERX system1
ERX models   1
compatibility with modules   1, 2
ERX system   1
assigning IP address to   1, 2
booting   1, 2, 3
cabling   1, 2, 3, 4
connecting to earth/ground   1
dimensions   1
hardware. See hardware1
installing   1, 2
installing components   1
installing software   1
lifting   1, 2
maintenance   1
management access   1, 2, 3
position in the network   1
powering up   1, 2
safety guidelines   1, 2, 3, 4
site planning   1, 2
slot identification and grouping   1, 2
specifications   1, 2
troubleshooting   1, 2
unpacking   1
Ethernet link   1, 2
Ethernet traffic   1
external timing ports   1

F

faceplate   1
FAIL LED   1
failure, fan   1, 2, 3
failures. See troubleshooting1
FAN FAIL LED   1
FAN OK LED   1
fans
failure   1, 2, 3
installing   1, 2
location   1
redundancy   1
removing   1, 2
fan tray   1
hot-swapping   1
far end receive failure. See FERF1, 2
FERF (far end receive failure)   1, 2
flow, air. See air flow1
forwarding rates, line modules   1, 2
frame synchronization   1
freestanding ERX system installation   1
FTP access   1, 2, 3

G

ground connections   1
grounding jack   1

H

hardware
cable configuration   1, 2, 3
for cabling   1
for installing ERX modules   1
for installing ERX system   1
redundancy features   1
repairing and replacing   1
heat dissipation   1, 2
hot-swapping
fan trays   1
modules   1
HSSI connectors, cabling   1
humidity specifications   1
HyperTerminal   1

I

I/O modules   1
cables   1, 2
cabling specifications   1, 2
compatibility with ERX models   1, 2
compatibility with line modules   1, 2
compatibility with SRP modules   1, 2
connectors   1, 2
installing   1, 2
installing redundancy   1
models   1, 2
port redundancy   1, 2
ports   1, 2
removing   1, 2
SFPs   1
SRP I/O modules. See SRP I/O modules1
icons defined, notice   1
identifying software release file   1
installing
ERX system   1, 2
freestanding installation   1
site planning   1, 2
modules
I/O modules   1, 2
line modules   1, 2
order of installation   1
precautions necessary   1
slot groups and module arrangements   1, 2
SRP I/O modules   1, 2
SRP modules   1, 2
NVS cards   1, 2
redundancy I/O modules   1
redundancy midplanes   1
SFPs   1
software, required information   1, 2, 3
spare line modules   1
installing the system software   1
IP address, assigning   1, 2, 3, 4

J

Juniper Networks documentation set   1
CD   1
CD, using the   1
comments on   1

L

LEDs   1, 2, 3
line modules   1
normal activity (chart)   1
redundancy status   1
SRP modules   1, 2
lifting ERX system   1, 2
line build-outs   1, 2, 3
line modules   1, 2
access   1
allowed combinations   1, 2
ASIC and non-ASIC types   1, 2
compatibility with ERX models   1, 2
compatibility with I/O modules   1, 2
compatibility with SRP modules   1, 2
installing   1, 2
installing spare   1
LEDs   1, 2, 3, 4
models   1, 2
performance rate   1, 2
performance specifications   1, 2
power use   1, 2
redundancy   1, 2, 3, 4
removing   1
slot groups   1, 2
uplink   1
linking to an FTP server. See FTP access1, 2
LINK LED   1
lline modules
redundancy   1, 2
location, for ERX system   1
loss of frame synchronization   1

M

maintenance, system   1
management access   1, 2, 3
setting up console   1, 2
SNMP   1, 2
Telnet setup   1
Management Information Bases   1
managing modules   1
manuals, Juniper Networks   1
comments on   1
on CD   1
mechanical requirements for distribution rack   1
MIBs (Management Information Bases)   1
midplane   1, 2
models, ERX   1
modules
descriptions   1, 2
failure. See troubleshooting1
hot-swapping   1
installing   1, 2
order of installation   1
precautions necessary   1
managing   1
ports   1
removing   1, 2
repairing and replacing   1
replacing   1
self-testing   1
storing   1
See also I/O modules; line modules; SRP modules1
monitoring
LEDs   1, 2
temperature   1
mounting a CD on an FTP server   1, 2, 3
mounting posts for rack   1

N

network management   1, 2, 3
setting up console   1, 2
SNMP   1, 2
Telnet setup   1
NMC-RX Device Management System   1
notice icons defined   1
NVS cards
installing   1, 2
storing   1

O

OK LED   1
ONLINE LED   1
operating environment. See environmental requirements1
order of module installation   1

P

packet classification   1
PCMCIA slot, SRP modules   1
performance rate, line modules   1, 2
pinouts, ERX cables and connectors   1
planning site for installation   1, 2
plenum   1
ports
alarm   1
console   1
external timing   1
module   1, 2, 3
redundancy   1, 2
positioning ERX system   1
power
cabling power input module   1, 2
consumption
line modules   1, 2
SRP modules   1
system   1
dissipation   1
failures   1, 2
redundancy   1
source A   1, 2
source B   1, 2
specifications   1
POWER A LED   1
POWER B LED   1
powering down ERX system   1
powering up ERX system   1, 2
power input module, cabling   1, 2
power switches   1, 2, 3
preinstallation responsibilities   1
preparing site for installation   1, 2
Privileged Exec command mode   1, 2
problems. See troubleshooting1

Q

QoS, packet classification for   1

R

rack, distribution. See distribution rack1
reaching an FTP server. See FTP access1, 2
rebooting. See booting1, 2
RED ALM LED   1, 2
redundancy features (hardware)   1
fans   1
line modules   1, 2, 3, 4, 5
ports   1, 2, 3
power   1
SRP modules   1
redundancy midplanes, installing   1
redundancy status   1
REDUNDANT LED. See LEDs1
release mechanisms for SFPs   1
removing
modules   1
SFPs   1
removing components   1
repairing hardware components   1
replacing
modules   1
NVS cards   1, 2
SFPs   1, 2
replacing components   1
RJ-45 connectors, cabling   1
RJ-48C connectors, cabling   1
RS-232 port   1, 2, 3, 4

S

safety
agency certification   1
guidelines   1, 2, 3, 4
saving the software configuration   1, 2
SC duplex connectors, cabling   1, 2, 3
self-testing, modules   1
series
ERX-1400   1
ERX-700   1
setting up. See configuring   1
SFPs (small form-factor pluggable transceivers)   1
installing   1
removing   1
storing   1
signal degradation, X.21/V.35 cables   1
site planning   1, 2
size
of ERX system   1
of rack   1
slot groups
ERX-1400   1
ERX-700   1
overloading   1
slot identification and grouping   1, 2
small form-factor pluggable transceivers. See SFPs1
SNMP for management access   1, 2
software
configuration   1, 2, 3
installing system   1
release file   1, 2, 3, 4
software, installing   1
software, upgrading   1
space requirements   1, 2, 3
spare line modules, installing   1
specifications
air flow   1
dimensions   1
distribution rack   1
electrical   1
environmental   1
ERX system   1, 2
heat dissipation   1
space   1
weight   1
SRP I/O modules   1
cabling   1, 2
installing   1, 2
removing   1
SRP modules   1, 2, 3
compatibility with ERX models   1, 2
compatibility with line modules and I/O modules   1, 2
errors on   1
installing   1, 2
LEDs on   1, 2, 3
models   1, 2, 3
PCMCIA slot   1
powering down   1
power use   1
redundancy   1, 2
removing   1, 2
specifications   1
starting ERX system   1, 2
status, redundancy   1
status LEDs. See LEDs1
storing, modules and components   1
switches, power   1, 2, 3
switching on ERX system   1, 2
synchronization, frame   1
SYNC LED   1, 2
syntax conventions defined   1
system. See ERX system1
system maintenance   1

T

Telnet connection to ERX system   1
temperature, excessive   1, 2
temperature, monitoring   1
temperature requirements   1, 2, 3
text conventions defined   1
thermal protection mode   1, 2, 3
timing ports (SRP I/O modules)   1
troubleshooting   1, 2
booting   1
cables   1
clocking   1
double-bit errors   1
Ethernet link   1
fans   1, 2, 3
FERF   1, 2
LED activity for   1, 2
modules   1, 2
power failure   1, 2
safety guidelines   1

U

uninstalling modules. See removing modules1
unpacking
ERX-1400 series   1
ERX-700 series   1
updating the system software   1
upgrading software   1
upgrading system software   1
uplink line modules   1

V

ventilation. See air flow1

W

weight
of ERX system   1
of rack   1, 2

X

X.21/V.35 cables   1

Y

YEL ALM LED   1, 2