Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    SRX5K-MPC3-100G10G Specifications

    The SRX5K-MPC3-100G10G (IOC3) is an interface card that provides 100 Gigabit Ethernet and 10 Gigabit Ethernet interfaces, with a Packet Forwarding Engine that provides a 240 Gbps line rate. This interface card is supported on SRX5400, SRX5600, and SRX5800 Services Gateways. See Figure 1.

    Note: These cards do not support plug-in Modular Interface Cards (MICs).

    All ports on the interface card have dual-color LEDs for reporting link status.

    The interface card also supports hot-pluggable optical modules.

    You can install the interface card in any of the slots that are not reserved for Switch Control Boards (SCBs).

    Figure 1: SRX5K-MPC3-100G10G

    SRX5K-MPC3-100G10G

    Note: In SRX5800 Services Gateways, you cannot install the interface card in slots 0 and 11.

    If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through the services gateway.

    Description

    • Fixed-configuration MPC with two 100-Gigabit Ethernet ports and four 10-Gigabit Ethernet ports
    • Maximum throughput: 240 Gbps
    • Maximum configurable MTU: 9192 bytes

    Software release

    Junos OS Release 15.1X49-D10 and later

    Cables and connectors

    Fiber-optic 10-Gigabit DAC transceivers:

    • SRX-SFP-10GE-DAC-1M
    • SRX-SFP-10GE-DAC-3M
    • EX-SFP-10GE-DAC-5M
    • EX-SFP-10GE-DAC-7M

    1000BASE CFP2 transceivers:

    • CFP2-100GBASE-SR10
    • CFP2-100GBASE-LR4

    Fiber-optic 10-Gigabit SFP+ transceivers:

    • SRX-SFP-10GE-SR
    • SFPP-10GE-ER-XT
    • SFPP-10GE-ER
    • SRX-SFPP-10G-SR-ET
    • SRX-SFPP-10G-LR
    • SRX-SFP-10GE-LR

    Power requirements

    • Typical: 10.52 A @ 48 V (505 W)

    At different temperatures:

    • 55° C: 607 W
    • 40° C: 541 W
    • 25° C: 511 W

    Weight

    21 lb (9.52 kg)

    Hardware features

    • Line-rate throughput of up to 240 Gbps
    • Supports up to 32,000 queues per-slot
    • LAN-PHY mode at 10.3125 Gbps on a per-port basis

    The ports are labeled as:

    • 10-Gigabit Ethernet ports: 0/0, 0/1, 2/0, and 2/1
    • 100-Gigabit Ethernet ports: 1/0 and 3/0

    Software features

    • Configurable LAN-PHY mode options per 10-Gigabit Ethernet port
    • Optical diagnostics and related alarms
    • Intelligent oversubscription services

    LEDs

    OK/FAIL LED, one bicolor:

    • Solid green—MPC is functioning normally.
    • Blinking green—MPC is transitioning online or offline.
    • Red—MPC has failed.

    10-Gigabit Ethernet LINK LED, one bicolor per port:

    • Green—Link is up.
    • Amber—Link is disabled.
    • Off—Link is down or disabled.

    100-Gigabit Ethernet LINK LED, one bicolor per port:

    • Green—Link is up.
    • Amber—Link is disabled.
    • Off—Link is down.

    Serial Number Location

    The serial number label is located as shown in Figure 2.

    Figure 2: SRX5K-MPC3-100G10G Serial Number Label

    SRX5K-MPC3-100G10G Serial Number Label

    Modified: 2015-10-22