WX CMS Dates & Milestones

The table below details important information relevant to each WX CMS software release. The dates and milestones provided are in accordance with the policies of WX CMS at the time of each software release and are in accordance with stated End of Life/End of Support policies for Juniper Networks.

ProductFRS DateEnd of EngineeringEnd of Life/
End of Support
WX CMS 5.7 02/27/2009 02/27/2013 02/27/2014
WX CMS 5.6 06/06/2008 12/06/20091 12/06/20101
WX CMS 5.5 08/24/2007 02/24/20091 02/24/20101
WX CMS 5.4 10/31/2006 04/30/20081 04/30/20091
WX CMS 5.2 04/01/2006 10/01/20071 10/01/20081
WX CMS 5.1 09/30/2005 03/30/2007 03/30/20081
WX CMS 5.0 10/19/2004 04/19/2006 04/19/2007
WX CMS 4.0 02/10/2004 08/10/2005 04/01/2006

For WX CMS software products, the period of active engineering support will be the current release plus two (2) subsequent releases, or up to eighteen (18) months from the FRS date, whichever occurs first. All software releases are considered major.

Update releases (e.g. service, maintenance, patch) will no longer be created for major software releases after the end of engineering (EOE) date.

JTAC support will continue after EOE for two (2) subsequent releases or up to twelve (12) months, whichever occurs first. After EOE and until EOL JTAC support will be generally limited to investigation and troubleshooting in an attempt to provide solutions and workarounds.

When the release reaches EOL the software images are removed from www.juniper.net and JTAC will only provide support on a commercially reasonable effort basis.


1 No later than the date posted, the date may be earlier if the subsequent releases are reached prior to the months of support option.

 
Copyright© 1999-2017 Juniper Networks, Inc. All rights reserved.