Elevate

Welcome to the Juniper Elevate Community

hero image

Promoted

Promo tile background

Check out the new TechPost 

Bits and Bytes Articles on Automated WAN Solutions, from Network Engineers to Network Engineers.

Browse Posts

Latest Discussions

  • Posted in: Routing

    The mode parameter sets if the relay is default open or closed for your requirement. Relay input selects the alarm criteria where the relay will switch to the other non-default position. Temperature alarm triggers are separate as you note. output selects which relay is applied. Example and ...

  • Posted in: SRX

    I don't have this setup myself, so take everything below with a grain of salt. Yes, that should be possible, though, just in case, you should double-check with your ISP to make sure they can route IPv4-Embedded IPv6 traffic. You can translate all IPv4 internet-bound traffic (the destination address) ...

  • Hi. On Step 6 of page 665 of the JNCIE-ENT Self Study Bundle, we are asked to apply a BA IPv4 classifier to all L3 interfaces. In the implementation of that task, the Study Bundle applies that classifier to L2 trunk interfaces ge-0/0/3 and ge-0/0/4. Isn't it a mistake to to call trunk ports L3 ...

  • Posted in: Switching

    good luck finding the loop. my most recent one was caused by a wifi access point wich, after a power up started meshing with another one too close and mac adresses started moving because of that. disabling mesh option stopped the issue, with the tech swearing that this option was off before. ------------------------------ ...

  • Posted in: Routing

    Hi, 1) Yes, in interpolate drop profile there will be dropping before 40 percent. In interpolate drop profile system generates 64 data point. You can create segmented drop-profile , in this case dropping will start after 40 percent. 2) It is expected behavior ( linearly increasing). You ...

  • Posted in: Junos OS

    Hello team, I am looking for an exact purpose of file mchassis-install.tgz I have noticed that this file gets created when I request software add. I am currently upgrading MX480 routers and facing limited space issue. I want to know if it is safe to delete mchassis-install.tgz file after the junos ...

  • Posted in: Junos OS

    Did you find the problem?

Latest Articles

  • Blog Entry
    Posted to: TechPost Blogs

    Express 5 is Juniper's new ASIC for service providers and cloud networks, delivering 2x power efficiency, enhanced traffic insights, hardware-based sampling, value-added services, and supporting high-speed, high-scale routing applications including AI/ML training clusters with up to 16M IPv4/IPv6 routes and 8M counters using a sustainable chiplet-based ...

  • Posted to: TechPost Blogs

    With network flow monitoring, you can troubleshoot application issues in a DC fabric with distributed, cloud-native, virtualized, and containerized workloads. Introduction In modern networks, network flow monitoring is essential for network administrators. Network flow monitoring provides far more than traditional connectivity monitoring can. ...

  • Posted to: TechPost Blogs

    The ACX7000 family is growing fast. Today, we try a different approach to present this update of the ACX7000 portfolio. Introduction Trying to present each product individually will be a very repetitive and boring process. A more exciting approach could be to describe how they are built and explain why we are selecting ...

Top Contributors of the Week