EX3400 Ethernet Switch Datasheet

Download Datasheet

Product Overview

Juniper Networks EX3400 Ethernet Switch delivers a high-performance, flexible, and cost-effective solution for today’s most demanding converged data, voice, and video enterprise access environments.

The EX3400 supports Juniper Networks Virtual Chassis technology, allowing up to 10 switches to be interconnected over uplink ports and managed as a single device, delivering a scalable, pay-as-you-grow solution for expanding network environments.

The EX3400 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. Mist Wired Assurance delivers better experiences for connected devices through AI-powered automation and service levels.

ex3400 24p front with top

Product Description

The Juniper Networks® EX3400 Ethernet Switch with Juniper Networks Virtual Chassis technology provides enterprises with the flexibility and ease of management that previously was only available with higher-end access switches. The fixed-configuration EX3400 supports a number of key features, including:

  • 24-port and 48-port models with and without Power over Ethernet (PoE/PoE+) are for campus wiring closet deployments.
  • Cloud-ready and zero-touch provisioning (ZTP)-enabled for Juniper Mist Wired Assurance
  • Data center-optimized cooling options offer both front-to-back and back-to-front airflows, making the EX3400 suitable for GbE data center access deployments.
  • Two redundant, field-replaceable power supplies each provide up to 920 watts of power.
  • 24-port data center models are included for metro deployments.
  • Four dual-mode (GbE/10GbE) small form-factor pluggable transceiver (SFP/SFP+) uplink ports and two 40GbE QSFP+ ports are available.
  • Uplink ports can be configured as Virtual Chassis interfaces and connected via standard 10GbE/40GbE optic interfaces (40GbE uplink ports are preconfigured by default as Virtual Chassis ports).
  • Comprehensive Layer 2 functionality with RIP and static routing is provided.
  • A compact, 13.8-inch deep 1 U form factor supports flexible deployment options.
  • An easy-to-manage solution includes centralized software upgrades.
  • Support is available for the same consistent modular Juniper Networks Junos operating system control plane feature implementation used by all other Juniper fixed-configuration Juniper Networks EX Series Ethernet Switches.
  • Support is provided for Layer 3 (OSPF v2, IGMP v1/v2/v3, PIM, VRRP, BFD, virtual router) via an enhanced feature license (optional license required).
  • Support is available for IPv6 management, including neighbor discovery, stateless auto configuration, telnet, SSH, DNS, system log, NTP, ping, traceroute, ACL, CoS static routing, and RIPng.
  • IPv6 routing features (OSPFv3, virtual router support for unicast, VRRPv6, PIM, MLDv1/v2) are supported via an enhanced feature license.
  • Support is available for Border Gateway Protocol (BGP), multiprotocol BGP (MBGP), and Intermediate System-to-Intermediate System (IS-IS) via an optional Advanced Feature license.
  • Energy Efficient Ethernet (EEE) capability is provided.

1Software to come in future

Architecture and Key Components

Cloud Management with Juniper Mist Wired Assurance

Juniper Mist Wired Assurance, a cloud-based service driven by Mist AI to claim, configure, manage, and troubleshoot the EX3400, delivers AI-powered automation and service levels to ensure a better experience for connected devices. Wired Assurance leverages rich Junos switch telemetry data to simplify operations, reduce mean time to repair, and improve visibility. Wired Assurance offers the following features:

  • Day 0 operations—Onboard switches seamlessly by claiming a greenfield switch or adopting a brownfield switch with a single activation code for true plug-and-play simplicity. 
  • Day 1 operations—Implement a template-based configuration model for bulk rollouts of traditional and campus fabric deployments, while retaining the flexibility and control required to apply custom site- or switch-specific attributes. Automate provisioning of ports via Dynamic Port Profiles. 
  • Day 2 operations—Leverage the AI in Juniper Mist Wired Assurance to meet service-level expectations such as throughput, successful connects, and switch health with key pre- and post-connection metrics (see Figure 1). Add the self-driving capabilities in Marvis Actions to detect loops, add missing VLANs, fix misconfigured ports, identify bad cables, isolate flapping ports, and discover persistently failing clients (see Figure 2). And perform software upgrades easily through Juniper Mist cloud. 
EX4300_08

Figure 1: Juniper Mist Wired Assurance service-level expectations 

EX4300_07

Figure 2: Marvis Actions for wired switches 

The addition of Marvis, a complementary Virtual Network Assistant driven by Mist AI, lets you start building a self-driving network that simplifies network operations and streamlines troubleshooting via automatic fixes for EX Series switches or recommended actions for external systems.

For more information see Juniper Mist Wired Assurance.

Virtual Chassis Technology

The EX3400 supports Juniper Networks Virtual Chassis technology, allowing up to 10 switches to be interconnected over uplink ports and managed as a single logical device, delivering a scalable, pay-as-you-grow solution for expanding network environments.

When deployed in a Virtual Chassis configuration, the EX3400 switches elect a primary and backup switch based on a set of criteria or preconfigured policies. The primary switch automatically creates and updates the switching and optional routing tables on all switches in the Virtual Chassis configuration. Virtual Chassis technology allows switches to be added or removed without service disruption. An EX3400 Virtual Chassis configuration operates as a highly resilient unified system, providing simplified management using a single IP address, single telnet session, single command-line interface (CLI), automatic version checking, and automatic configuration. The EX3400 switches are also capable of local switching, so that packets coming into a port destined for another port on the same switch do not have to traverse the Virtual Chassis, increasing the forwarding capacity of the switch.

The EX3400 implements the same slot/module/port numbering schema as other Juniper Networks chassis-based products when numbering Virtual Chassis ports, providing true chassis-like operations. By using a consistent operating system and a single configuration file, all switches in a Virtual Chassis configuration are treated as a single device, simplifying overall system maintenance and management.

The two QSFP+ ports on the EX3400 switch can be configured as Virtual Chassis ports or as uplinks to aggregation devices.

ex3400-img2

Figure 3: EX3400 Virtual Chassis deployments

Campus Fabric Deployments

Juniper campus fabrics support these validated architectures with the EX3400 switch playing the role of access switch:

  • EVPN multihoming (collapsed core or distribution): A collapsed core architecture combines the core and distribution layers into a single switch, turning the traditional three-tier hierarchal network into a two-tier network. This eliminates the need for STP across the campus network by providing multihoming capabilities from the access to the core layer.  EVPN multihoming can be deployed and managed using the Juniper Mist cloud.
  • Core/distribution: A pair of interconnected EX Series core or distribution switches provide L2 EVPN and L3 VXLAN gateway support. The EVPN-VXLAN network between the distribution and core layers offers two modes: centrally or edge routed bridging overlay.

In all these EVPN-VXLAN deployment modes, EX3400 switches can be used as an access layer switch.

EX4300_09

Figure 4: Campus fabrics showing Virtual Chassis and EVPN-VXLAN-based architectures

Features and Benefits

Managing AI-Driven Campus Fabric with the Juniper Mist Cloud

Juniper Mist Wired Assurance brings cloud management and Mist AI to campus fabric. It sets a new standard moving away from traditional network management towards AI-driven operations, while delivering better experiences to connected devices.  The Juniper Mist Cloud streamlines deployment and management of campus fabric architectures by allowing:

  • Automated deployment and zero touch deployment
  • Anomaly detection 
  • Root cause analysis
EX4300_10

Figure 5. EVPN multihoming configuration via the Juniper Mist cloud

Juniper Virtual Chassis

Virtual Chassis technology simplifies network management for smaller deployments. Up to 10 interconnected EX3400 switches can be managed as a single device utilizing a single Junos OS image and a single configuration file, reducing the overall number of units to monitor and manage. When the Junos OS is upgraded on the primary switch in an EX3400 Virtual Chassis configuration, the software is automatically upgraded on all other member switches at the same time.

In addition, a feature called system snapshot makes a copy of all software files used to run the switch, including the Junos operating system, the active configuration, and the rescue configuration. These copies can be used to reboot the switch the next time it is powered up or as a backup boot option. The Junos OS software can also be preinstalled on a flash drive and used to boot the EX3400 at any time.

Another feature, called automatic software download, enables network administrators to easily upgrade the EX3400 using the DHCP message exchange process to download and install software packages. Users simply configure the automatic software download feature on EX3400 switches acting as DHCP clients and establish a path to the server where the software package file is installed. The server then communicates the path to the software package file through DHCP server messages.

The ZTP feature allows a DHCP server to push configuration details and software images to multiple switches at boot-up time.

Power

The EX3400 supports the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. While EX3400 switches ship with a single power supply by default, they can support redundant 600W or 920W power supplies that provide PoE (15.4W) or PoE+ (30W) power to all ports in the switch. Spare power supplies can be ordered as needed.

There are two PoE power mode settings on the EX3400 switches:

  • Static mode allows customers to specify the maximum PoE power setting on an individual port.
  • Class mode allows end devices to specify PoE class and negotiate whether the switch can provide PoE power to the device.

The EX3400 also supports the industry-standard Link Layer Discovery Protocol (LLDP) and LLDP-Media Endpoint Discovery (LLDP-MED), which enable the switches to automatically discover Ethernet-enabled devices, determine their power requirements, and assign virtual LAN (VLAN) parameters. LLDP-MED-based granular PoE management allows the EX3400 to negotiate PoE usage down to a fraction of a watt on powered devices, enabling more efficient PoE utilization across the switch.

The EX3400 supports the IEEE 802.3az standard for Energy Efficient Ethernet (EEE) functionality, reducing power consumption of copper physical layers during periods of low link utilization.

In addition, the EX3400 supports rich quality-of-service (QoS) functionality for prioritizing data, voice, and video traffic. The switches support 12 QoS queues (8 unicast and 4 multicast) on every port, enabling them to maintain multilevel, end-to-end traffic prioritization. The EX3400 also supports a wide range of scheduling options, such as priority and shaped-deficit weighted round-robin (SDWRR) scheduling.

Table 1. EX3400 PoE Power Budget
SKU Total 10/100/1000BASE-T Ports Total 30 W PoE+ Ports That Can Be Enabled Total 15.4 W PoE Ports That Can Be Enabled Power Supply Type PoE+ Power Budget (W)
EX3400-24P 24 24 ports up to 30W 24 ports up to 15.4W AC 370W/720W
EX3400-48P 48 48 ports up to 30W 48 ports up to 15.4W AC 740W/1440W

Security

The EX3400 switches fully interoperate with Juniper Networks Access Policy Infrastructure, which consolidates all aspects of a user’s identity, device, and location, enabling administrators to enforce access control and security down to the individual port or user levels. Working as an enforcement point in the Access Policy Infrastructure, the EX3400 provides both standards-based 802.1X port-level access control and Layer 2-4 policy enforcement based on user identity, location, device, or a combination of these. A user’s identity, device type, machine posture check, and location can be used to not only grant or deny access but also to determine the duration of access. If access is granted, the switch assigns the user to a specific VLAN based on authorization levels. The switch can also apply QoS policies or mirror user traffic to a central location for logging, monitoring, or threat detection by an intrusion prevention system (IPS).

The EX3400 also provides a full complement of port security features, including Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP inspection (DAI), and media access control (MAC) limiting to defend against internal and external spoofing, man-in-the-middle, and denial-of-service (DoS) attacks.

MACsec

EX3400 switches support IEEE 802.1ae MACsec, providing support for link-layer data confidentiality, data integrity, and data origin authentication. The MACsec feature enables the EX3400 to support 88 Gbps of near line-rate hardware-based traffic encryption on all GbE and 10GbE ports.

Defined by IEEE 802.1AE, MACsec provides secure, encrypted communication at the link layer that is capable of identifying and preventing threats from DoS and intrusion attacks, as well as man-in-the-middle, masquerading, passive wiretapping, and playback attacks launched from behind the firewall. When MACsec is deployed on switch ports, all traffic is encrypted on the wire but traffic inside the switch is not. This allows the switch to apply all network policies such as QoS, deep packet inspection, and sFlow to each packet without compromising the security of packets on the wire.

Hop-by-hop encryption enables MACsec to secure communications while maintaining network intelligence. In addition, Ethernet-based WAN networks can use MACsec to provide link security over long-haul connections. MACsec is transparent to Layer 3 and higher-layer protocols and is not limited to IP traffic—it works with any type of wired or wireless traffic carried over Ethernet links.

Junos Operating System

The EX3400 switches run the same Junos OS that is used by other Juniper Networks EX Series Ethernet Switches, QFX Series Switches, Juniper Routers, Juniper SRX Firewalls, and the Juniper NFX Series Network Services Platform. By utilizing a common operating system, Juniper delivers a consistent implementation and operation of control plane features across all products. To maintain that consistency, Junos OS adheres to a highly disciplined development process that uses a single source code and employs a highly available modular architecture that prevents isolated failures from bringing an entire system down.

These attributes are fundamental to the core value of the software, enabling all Junos OS-powered products to be updated simultaneously with the same software release. All features are fully regression tested, making each new release a true superset of the previous version. Customers can deploy the software with complete confidence that all existing capabilities are maintained and operate in the same way.

Converged Environments

The EX3400 switches provide a flexible solution for demanding converged data, voice, and video environments. The EX3400-24P and EX3400-48P support PoE+, delivering up to 30 watts of power per port to support networked devices such as telephones, video cameras, IEEE 802.11ac wireless LAN (WLAN) access points, and videophones. The PoE+ standard provides nearly double the 15.4 watts per port available with the IEEE 802.3af PoE standard.

Product Options

Table 2. EX3400 Ethernet Switch Models
2 1 power supply
3 2 power supplies
* Input power without PoE
SKU Total 10/100/1000
BASE-T Ports
Uplinks Airflow  Power Supply Type  PoE+ Power
(Budget W) 
Max. System Power
Consumption (W)* 
Power Supply
Rating (W) 
EX3400-24T 24

10GbE/GbE SFP+/SFP ports
2 40GbE QSFP+ ports

Front-to-back AC 0 100 150W
EX3400-48T 48 Front-to-back AC 0 120 150W
EX3400-48T-AFI 48 Back-to-front AC 0 120 150W
EX3400-24P 24 PoE+ Front-to-back AC 370W2/720W3 110 600W
EX3400-48P 48 PoE+ Front-to-back AC 740W2/1440W3 120 920W
EX3400-24T-DC  24 Front-to-back DC 0 100 150W
EX3400-48T-DC 48 Front-to-back DC 0 120 150W

High Availability

The EX3400 line of Ethernet switches is designed to support many of the same failover capabilities and high availability (HA) functionality as other Juniper EX access switches with Virtual Chassis technology.

Each EX3400 switch is capable of functioning as a Routing Engine (RE) when deployed in a Virtual Chassis configuration. When two or more EX3400 switches are interconnected in a Virtual Chassis configuration, all member switches share a single control plane. Junos OS automatically initiates an election process to assign a primary (active) and backup (hot-standby) Routing Engine. An integrated Layer 2 and Layer 3 graceful Routing Engine switchover (GRES) feature maintains uninterrupted access to applications, services, and IP communications in the unlikely event of a primary Routing Engine failure.

When more than two switches are interconnected in a Virtual Chassis configuration, the remaining switch elements act as line cards and are available to take on the backup Routing Engine position should the designated primary fail. Primary, backup, and line card priority status can be assigned by the network operations team to dictate the order of ascension. This N+1 Routing Engine redundancy—coupled with GRES, the nonstop routing (NSR), and, in the future, the nonstop bridging (NSB) capabilities of Junos OS—ensures a smooth transfer of control plane functions following unexpected failures.

The EX3400 also supports the following HA features:

  • Redundant trunk group—To avoid the complexities of Spanning Tree Protocol (STP) without sacrificing network resiliency, the EX3400 employs redundant trunk groups to provide the necessary port redundancy and simplify switch configuration.
  • Cross-member link aggregation—Cross-member link aggregation allows redundant link aggregation connections between devices in a single Virtual Chassis configuration, providing an additional level of reliability and availability.
  • Nonstop bridging (NSB) and nonstop active routing (NSR)—NSB and NSR on the EX3400 switch ensure control plane protocols, states, and tables are synchronized between primary and backup REs to prevent protocol flaps or convergence issues following a Routing Engine failover.
  • Nonstop software upgrade (NSSU)—With NSSU, all members of an EX3400 Virtual Chassis configuration can be upgraded with a single command. Mission-critical traffic can be configured as a link aggregate across multiple Virtual Chassis switch members, ensuring minimal disruption during the upgrade process.

Flex Licensing

Juniper Flex licensing offers a common, simple, and flexible licensing model for EX Series access switches, enabling customers to purchase features based on their network and business needs.

Flex licensing is offered in Standard, Advanced, and Premium tiers. Standard tier features are available with the Junos OS image that ships with EX Series switches. Additional features can be unlocked with the purchase of a Flex Advanced or Flex Premium license.

The Flex Advanced and Premium licenses for the EX Series platforms are class based, determined by the number of access ports on the switch. Class 1 (C1) switches have 12 ports, Class 2 (C2) switches have 24 Ports, and Class 3 (C3) switches have 32 or 48 Ports.

The EX3400 switches support both subscription and perpetual Flex licenses. Subscription licenses are offered for three- and five-year terms. In addition to Junos features, the Flex Advanced and Premium subscription licenses include Juniper Mist Wired Assurance. Flex Advanced and Premium subscription licenses also allow portability across the same tier and class of switches, ensuring investment protection for the customer.

For a complete list of features supported by the Flex Standard, Advanced, and Premium tiers, or to learn more about Junos EX Series licenses, please visit https://www.juniper.net/documentation/us/en/software/license/licensing/topics/concept/flex-licenses-for-ex.html.

Enhanced Limited Lifetime Warranty

The EX3400 includes an enhanced limited lifetime hardware warranty that provides return-to-factory switch replacement for as long as the original purchaser owns the product. The warranty includes lifetime software updates, advanced shipping of spares within one business day, and 24x7 Juniper Networks Technical Assistance Center (JTAC) support for 90 days after the purchase date. Power supplies and fan trays are covered for a period of five years. For complete details, please visit https://support.juniper.net/support/

ex3400-img3

Physical Specifications

Dimensions (W x H x D)

  • Base unit: 17.36 x 1.72 x 13.78 in (44.1 x 4.37 x 35 cm)
  • With power supply installed: 17.36 x 1.72 x 15.05 in (44.1 x 4.37 x 38.24 cm)
  • With power supply and front module installed: 17.36 x 1.72 x 15.19 in (44.1 x 4.37 x 38.58 cm)

Backplane

  • 160 Gbps (with QSFP+ ports) or 80 Gbps (with SFP+ ports) Virtual Chassis interconnect to link up to 10 switches as a single logical device

Uplink

  • Fixed 4-port uplinks can be individually configured as GbE (SFP) or 10GbE (SFP+) ports; 2 x 40G QSFP+ ports.

System Weight

  • EX3400 switch (no power supply or fan module): 10.49 lb (4.76 kg) maximum
  • EX3400 switch (with single power supply and two fan modules): 12.65 lb (5.74 kg) maximum
  • 150 W AC power supply: 1.43 lb (0.65 kg)
  • 600 W AC power supply: 1.82 lb (0.83 kg)
  • 920 W AC power supply: 1.87 lb (0.85 kg)
  • 150 W DC power supply: 1.43 lb (0.65 kg)
  • Fan module: 0.16 lb (0.07 kg)

Environmental Ranges

  • Operating temperature: 32° to 113° F (0° to 45° C)
  • Storage temperature: -40° to 158° F (-40° to 70° C)
  • Operating altitude: up to 10,000 ft (3048 m)
  • Nonoperating altitude: up to 16,000 ft (4877 m)
  • Relative humidity operating: 10% to 85% (noncondensing)
  • Relative humidity nonoperating: 0% to 95% (noncondensing)

Hardware Specifications

Switching Engine Model

  • Store and forward

DRAM

  • 2 GB with ECC

Flash

  • 2 GB

CPU

  • Dual Core 1 GHz

GbE Port Density per System

  • EX3400-24T/EX3400-24P/EX3400-24T-DC: 30 (24 host ports + four 1/10 GbE and two 40GbE uplink ports)
  • EX3400-48T/EX3400-48T-AFI/EX3400-48P/EX3400-48T-DC: 54 (48 host ports + four 1/10 GbE and two 40GbE uplink ports)

Physical Layer

  • Cable diagnostics for detecting cable breaks and shorts
  • Auto medium-dependent interface/medium-dependent interface crossover (MDI/MDIX) support
  • Port speed downshift/setting maximum advertised speed on 10/100/1000BASE-T ports
  • Digital optical monitoring for optical ports

Packet-Switching Capacities (Maximum with 64-Byte Packets)

  • EX3400-24T, EX3400-24P, EX3400-24T-DC: 144 Gbps (unidirectional)/288 Gbps (bidirectional)
  • EX3400-48T, EX3400-48T-AFI, EX3400-48P, EX3400-48T-DC: 168 Gbps (unidirectional)/336 Gbps (bidirectional)

Software Specifications

Layer 2/Layer 3 Throughput (Mpps) (Maximum with 64 Byte Packets)

  • 24P/24T/24T-DC: 214 Mpps
  • 48P/48T/48T-BF/48T-DC: 250 Mpps

Layer 2 Features

  • Maximum MAC addresses per system: 32,000
  • Jumbo frames: 9216 bytes
  • Number of VLANs supported: 4,096
  • Range of possible VLAN IDs: 1-4094
  • Port-based VLAN
  • MAC-based VLAN
  • Voice VLAN
  • Layer 2 Protocol Tunneling (L2PT)
  • Compatible with Per-VLAN Spanning Tree Plus (PVST+)
  • RVI (routed VLAN interface)
  • Persistent MAC (sticky MAC)
  • RSTP and VSTP running concurrently
  • IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
  • LLDP-MED with VoIP integration
  • IEEE 802.1ae Media Access Control Security (MACsec)
  • IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
  • IEEE 802.1br: Bridge Port Extension
  • IEEE 802.1D: Spanning Tree Protocol
  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q-in-Q: VLAN stacking
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
  • Number of MST instances supported: 64
  • Number of VSTP instances supported: 510
  • IEEE 802.1w: Rapid Spanning Tree Protocol (RSTP)
  • IEEE 802.1X: Port access control
  • IEEE 802.3: 10BASE-T
  • IEEE 802.3ab: 1000BASE-T
  • IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  • IEEE 802.1ad Q-in-Q tunneling
  • IEEE 802.3ae: 10-Gigabit Ethernet
  • IEEE 802.3af: PoE
  • IEEE 802.3at: PoE+
  • IEEE 802.3u: 100BASE-T
  • IEEE 802.3z: 1000BASE-X
  • IEEE 802.3x: Pause Frames/Flow Control
  • Layer 3 VLAN-tagged subinterface
  • PVLAN support
  • Multicast VLAN routing
  • Adding/removing single tag
  • Filter-based SVLAN tagging
  • Flexible CoS (outer .1P marking)

Layer 3 Features: IPv4

  • Maximum number of ARP entries: 16,000
  • Maximum number of IPv4 unicast routes in hardware: 14,000 prefixes; 36,000 host routes
  • Maximum number of IPv4 multicast routes in hardware: 18,000 groups; 4,000 multicast routes
  • Routing Protocols: RIP v1/v2, OSPF v2
  • Static routing
  • Layer 3 redundancy: VRRP
  • IP directed broadcast—traffic forwarding
  • Virtual router (VRF-Lite) supporting RIP, OSPF
  • Routing policy
  • Filter-based forwarding (FBF)
  • Unicast reverse-path forwarding

Layer 3 Features: IPv6

  • Maximum number of Neighbor Discovery entries: 8,000
  • Maximum number of IPv6 unicast routes in hardware: 3,500 prefixes; 18,000 host routes
  • Maximum number of IPv6 multicast routes in hardware: 9,000 groups; 2,000 multicast routes
  • Neighbor discovery, system logging, Telnet, SSH, Junos Web, SNMP, Network Time Protocol (NTP), Domain Name System (DNS)
  • Routing protocols: RIPng, OSPF v3
  • Static routing
  • IPv6 ACL (PACL, VACL, RACL)
  • IPv6 CoS (BA, MF classification and rewrite, scheduling based on TC)
  • MLDv1/v2 snooping
  • IPv6 ping, traceroute
  • IPv6 stateless auto-configuration
  • IPv6 Layer 3 forwarding in hardware
  • IPv6 Layer 3 redundancy: VRRP v6
  • Virtual Router support for IPv6 unicast
  • PIM for IPv6 multicast

Access Control Lists (ACLs) (Junos OS Firewall Filters)

  • Port-based ACL (PACL)—ingress and egress
  • VLAN-based ACL (VACL)—ingress and egress
  • Router-based ACL (RACL)—ingress and egress
  • ACL entries (ACE) in hardware per system: 1500
  • ACL counter for denied packets
  • ACL counter for permitted packets
  • Ability to add/remove/change ACL entries in middle of list (ACL editing)
  • L2-L4 ACL
  • Trusted Network Connect (TNC) certified
  • Static MAC authentication
  • MAC-RADIUS
  • Control plane denial-of-service (DoS) protection
  • Firewall filter on me0 interface (control plane protection)
  • Captive portal—Layer 2 interfaces
  • Fallback authentication
  • Media Access Control Security (MACsec)

Access Security

  • MAC limiting
  • Allowed MAC addresses, configurable per port
  • Dynamic ARP inspection (DAI)
  • Proxy ARP
  • Static ARP support
  • DHCP snooping
  • 802.1X port-based
  • 802.1X multiple supplicants
  • 802.1X with VLAN assignment
  • 802.1X with authentication bypass access (based on host MAC address)
  • 802.1X with VoIP VLAN support
  • 802.1X dynamic access control list (ACL) based on RADIUS attributes
  • 802.1X supported EAP types: MD5, Transport Layer Security (TLS), Tunneled Transport Layer Security (TTLS), Protected Extensible Authentication
  • Protocol (PEAP)
  • IPv6 RA Guard
  • IPv6 Neighbor Discovery Inspection
  • Media Access Control security (MACsec)

High Availability

  • Link aggregation:
  • 802.3ad (LACP) support
  • Number of link aggregation groups (LAGs) supported: 128
  • Maximum number of ports per LAG: 16
  • Tagged ports support in LAG
  • Graceful Route Engine switchover (GRES) for IGMP v1/v2/v3 snooping
  • Nonstop routing (OSPF v1/v2/v3, RIP/RIPng, PIM)
  • Nonstop software upgrade (NSSU)

Quality of Service (QoS)

  • Layer 2 QoS
  • Layer 3 QoS
  • Ingress policing: two-rate three-color
  • Hardware queues per port: 12 (8 unicast, 4 multicast)
  • Scheduling methods (egress): Strict Priority (SP), SDWRR
  • 802.1p, DiffServ code point (DSCP/IP) precedence trust and marking
  • L2-L4 classification criteria, including Interface, MAC address, EtherType, 802.1p, VLAN, IP address, DSCP/IP precedence, and TCP/UDP port numbers
  • Congestion avoidance capabilities: Tail drop

Multicast

  • IGMP snooping entries: 1000
  • IGMP snooping
  • IGMP v1/v2/v3
  • PIM SM, PIM SSM, PIM DM
  • VRF-Lite support for PIM and IBMP
  • MLD v1/v2 snooping
  • IGMP filter
  • Multicast Source Discovery Protocol (MSDP)
  • PIM for IPv6 multicast

Management and Analytics Platforms

  • Juniper Mist Wired Assurance for Campus
  • Junos Space® Network Director for Campus
  • Junos Space® Management 

Device Management and Operations

  • Junos OS CLI
  • Junos Web interface (J-Web)
  • Out-of-band management: Serial, 10/100BASE-T Ethernet
  • ASCII configuration
  • Rescue configuration
  • Configuration rollback
  • Image rollback
  • Real-time performance monitoring (RPM)
  • SNMP: v1, v2c, v3
  • Remote monitoring (RMON) (RFC 2819) Groups 1, 2, 3, 9
  • Network Time Protocol (NTP)
  • DHCP server
  • DHCP client and DHCP proxy
  • DHCP relay and helper
  • VR-aware DHCP
  • RADIUS authentication
  • TACACS+ authentication
  • SSHv2
  • Secure copy
  • HTTP/HTTPs
  • DNS resolver
  • System logging
  • Temperature sensor
  • Configuration backup via FTP/secure copy
  • sFlow
  • Interface range
  • Port profile associations
  • Uplink failure detection
  • Zero Touch Provisioning using DHCP

Supported RFCs

  • RFC 768 UDP
  • RFC 783 Trivial File Transfer Protocol (TFTP)
  • RFC 791 IP
  • RFC 792 Internet Control Message Protocol (ICMP)
  • RFC 793 TCP
  • RFC 826 Address Resolution Protocol (ARP)
  • RFC 854 Telnet client and server
  • RFC 894 IP over Ethernet
  • RFC 903 Reverse ARP (RARP)
  • RFC 906 Bootstrap Loading using TFTP
  • RFC 951, 1542 BootP
  • LLDP-MED, ANSI/TIA-1057, draft 08
  • RFC 1027 Proxy ARP
  • RFC 1058 RIP v1
  • RFC 1122 Host requirements
  • RFC 1256 IPv4 ICMP Router Discovery (IRDP)
  • RFC 1492 TACACS+
  • RFC 1519 Classless Interdomain Routing (CIDR)
  • RFC 1591 Domain Name System (DNS)
  • RFC 1812 Requirements for IP Version 4 routers
  • RFC 2030 Simple Network Time Protocol (SNTP)
  • RFC 2068 HTTP/1.1
  • RFC 2131 BootP/DHCP relay agent and DHCP server
  • RFC 2138 RADIUS Authentication
  • RFC 2139 RADIUS Accounting
  • RFC 2267 Network Ingress Filtering
  • RFC 2328 OSPF v2
  • RFC 2453 RIP v2
  • RFC 2474 DiffServ Precedence, including 8 queues/port
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
  • RFC 2710 Multicast Listener Discovery Version (MLD) for IPv6
  • RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations
  • RFC 3569 PIM SSM
  • RFC 3579 RADIUS Extensible Authentication Protocol (EAP) support for 802.1X
  • RFC 3618 Multicast Source Discovery Protocol (MSDP)
  • RFC 3768 VRRP
  • RFC 3973 PIM DM
  • RFC 4601 PIM SM
  • RFC 5176 Dynamic Authorization Extensions to RADIUS

Supported MIBs

  • RFC 1155 Structure of Management Information (SMI)
  • RFC 1157 SNMPv1
  • RFC 1212, RFC 1213, RFC 1215 MIB-II, Ethernet-like MIB, and Traps
  • RFC 1493 Bridge MIB
  • RFC 1643 Ethernet MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1905 RFC 1907 SNMP v2c, SMIv2, and Revised MIB-II
  • RFC 1981 Path MTU Discovery for IPv6
  • RFC 2011 SNMPv2 Management Information Base for the IP using SMIv2
  • RFC 2012 SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2
  • RFC 2013 SNMPv2 Management Information Base for the User Datagram Protocol using SMIv2
  • RFC 2096 IPv4 Forwarding Table MIB
  • RFC 2287 System Application Packages MIB
  • RFC 2328 OSPF v2
  • RFC 2460 IPv6 Specification
  • RFC 2464 Transmission of IPv6 Packets over Ethernet Networks
  • RFC 2570-2575 SNMPv3, user-based security, encryption, and authentication
  • RFC 2576 Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework
  • RFC 2578 SNMP Structure of Management Information MIB
  • RFC 2579 SNMP textual conventions for SMIv2
  • RFC 2665 Definitions of Managed Objects for the Ethernet-like Interface Types
  • RFC 2819 RMON MIB
  • RFC 2863 Interface Group MIB
  • RFC 2863 The Interfaces Group MIB
  • RFC 2922 LLDP MIB
  • RFC 2925 Definitions of Managed Objects for Remote Ping/Traceroute, and Lookup Operations
  • RFC 3413 SNMP application MIB
  • RFC 3414 User-based Security Model for SNMPv3
  • RFC 3415 View-based access control model (VACM) for SNMP
  • RFC 3484 Default Address Selection for IPv6
  • RFC 3621 PoE-MIB (PoE switches only)
  • RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
  • RFC 4188 STP and Extensions MIB
  • RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers
  • RFC 4291 IPv6 Addressing Architecture
  • RFC 4363 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and VLAN Extensions
  • RFC 4443 ICMPv6 for the IPv6 Specification
  • RFC 4861 Neighbor Discovery for IPv6
  • RFC 4862 IPv6 Stateless Address Autoconfiguration
  • RFC 5643 OSPF v3 MIB Support
  • IEEE 802.1ad Q-in-Q
  • Draft – blumenthal – aes – usm - 08
  • Draft – reeder - snmpv3 – usm - 3desede -00

Troubleshooting

  • Debugging: CLI via console, telnet, or SSH
  • Diagnostics: Show and debug command statistics
  • Traffic mirroring (port)
  • Traffic mirroring (VLAN)
  • Filter-based mirroring
  • Mirroring destination ports per system: 4
  • LAG port monitoring
  • Multiple destination ports monitored to 1 mirror (N:1)
  • Maximum number of mirroring sessions: 4
  • Mirroring to remote destination (over L2): 1 destination VLAN
  • Encapsulated Remote Switched Port Analyzer (ERSPAN)
  • IP tools: Extended ping and trace
  • Juniper Networks commit and rollback

Safety Certifications

  • UL-UL60950-1 (Second Edition)
  • C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition)
  • TUV/GS to EN 60950-1 (Second Edition), Amendment
  • A1-A4, A11
  • CB-IEC60950-1, (Second Edition with all country deviations)
  • EN 60825-1 (Second Edition)

Electromagnetic Compatibility Certifications

  • FCC 47CFR Part 15 Class A
  • EN 55022 Class A
  • ICES-003 Class A
  • VCCI Class A
  • AS/NZS CISPR 22 Class A
  • CISPR 22 Class A
  • EN 55024
  • EN 300386
  • CE

Telecom Quality Management

  • TL9000

Environmental

  • Reduction of Hazardous Substances (ROHS) 6

Telco

  • CLEI code

Noise Specifications

  • Noise measurements are based on operational tests taken from bystander position (front) and performed at 23° C in compliance with ISO 7779.
Table 3: Noise Test Results
Model Acoustic Noise in DBA
EX3400-24T 36
EX3400-24P 37
EX3400-24T-DC 36
EX3400-48T/EX3400-48T-DC 35
EX3400-48T-AFI 39
EX3400-48P 46

Warranty

  • Limited lifetime switch hardware warranty

Juniper Networks Services and Support

Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your high-performance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required levels of performance, reliability, and availability. For more details, please visit https://www.juniper.net/us/en/products.html.

Ordering Information

Product Number Description
Switches
EX3400-24T EX3400 24-port 10/100/1000BASE-T with 4 SFP+ and 2 QSFP+ uplink ports (optics not included)
EX3400-24P EX3400 24-port 10/100/1000BASE-T (24 PoE+ ports) with 4 SFP+ and 2 QSFP+ uplink ports (optics not included)
EX3400-24T-DC EX3400 24-port 10/100/1000BASE-T with 4 SFP+ and 2 QSFP+ uplink ports (optics not included) and DC power supply
EX3400-48T EX3400 48-port 10/100/1000BASE-T, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-150-AC-AFO included (optics sold separately)
EX3400-48T-AFI EX3400 48-port 10/100/1000BASE-T, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, back-to-front airflow, 1 AC PSU JPSU-150-AC-AFI included (optics sold separately)
EX3400-48P EX3400 48-port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+ and 2 QSFP+ uplink ports (optics not included)
EX3400-48T-DC EX3400 48-port 10/100/1000BASE-T with 4 SFP+ and 2 QSFP+ uplink ports (optics not included) and DC power supply
EX3400-24T-TAA EX3400 TAA 24-port 10/100/1000BASE-T, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-150-AC-AFO included (optics sold separately)
EX3400-24P-TAA EX3400 TAA 24-port 10/100/1000BASE-T PoE+, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-600-AC-AFO included (optics sold separately)
EX3400-48T-TAA EX3400 TAA 48-port 10/100/1000BASE-T, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-150-AC-AFO included (optics sold separately)
EX3400-48P-TAA EX3400 TAA 48-port 10/100/1000BASE-T PoE+, 4 x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+, redundant fans, front-to-back airflow, 1 AC PSU JPSU-920-AC-AFO included (optics sold separately)
Accessories
EX-4PST-RMK Adjustable 4-post rack-mount kit for EX2200, EX3200, EX3400, and EX4200
EX-RMK Rack-mount kit for EX2200, EX3200, EX3400, and EX4200
EX-WMK EX4200, EX3200, EX3400, and EX2200 wall-mount kit with baffle
CBL-EX-PWR-C13-AU AC power cable, Australia (10 A/250V, 2.5m)
CBL-EX-PWR-C13-C14 AC power cable, patch cord (10 A/250V, 2.5 m) for EU only
CBL-EX-PWR-C13-CH AC power cable, China (10 A/250V, 2.5m)
CBL-EX-PWR-C13-EU AC power cable, Europe (10 A/250V, 2.5m)
CBL-EX-PWR-C13-IT AC power cable, Italy (10 A/250V, 2.5m)
CBL-EX-PWR-C13-JP AC power cable, Japan (12 A/125V, 2.5m)
CBL-EX-PWR-C13-KR AC power cable, Korea (10 A/250V, 2.5m)
CBL-EX-PWR-C13-SZ AC power cable, Switzerland (10 A/250V, 2.5m)
CBL-EX-PWR-C13-UK AC power cable, UK (10 A/250V, 2.5m)
CBL-EX-PWR-C13-US AC power cable, U.S. (13 A/125V, 2.5m)—not to be used with EX3400-48P SKUs
CBL-PWR-C13-US-48P AC power cable, US/Canada (15A/125V, 2.5m)–for EX3400-48P only
Subscription Licenses
S-EX-A-C2-3 Software, EX Series Advanced license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches, 3 year
S-EX-A-C2-5 Software, EX Series Advanced license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches, 5 year
S-EX-P-C2-3 Software, EX Series Premium license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches, 3 year
S-EX-P-C2-5 Software, EX Series Premium license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches, 5 year
S-EX-A-C3-3 Software, EX Series Advanced license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year
S-EX-A-C3-5 Software, EX Series Advanced license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 5 year
S-EX-P-C3-3 Software, EX Series Premium license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year
S-EX-P-C3-5 Software, EX Series Premium license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 5 year
S-EX-A-C2-3-COR Software, EX Series Advanced license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches, 3 year with SVC CORE support, 3 year
S-EX-A-C2-5-COR Software, EX Series Advanced license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches with SVC CORE support, 5 YEAR
S-EX-P-C2-3-COR Software, EX Series Premium license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches with SVC CORE support, 3 YEAR
S-EX-P-C2-5-COR Software, EX Series Premium license, Class 2 (24 ports), includes Wired Assurance subscription for EX Series 24-port switches with SVC CORE support, 5 YEAR
S-EX-A-C3-3-COR Software, EX Series Advanced license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year with SVC CORE support, 3 YEAR
S-EX-A-C3-5-COR Software, EX Series Advanced license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year with SVC CORE support, 5 YEAR
S-EX-P-C3-3-COR Software, EX Series Premium license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year with SVC CORE support, 3 YEAR
S-EX-P-C3-5-COR Software, EX Series Premium license, Class 3 (32 or 48 ports), includes Wired Assurance subscription for EX Series 48-port switches, 3 year with SVC CORE support, 5 YEAR
Perpetual Licenses
S-EX-A-C2-P Software, EX Series Advanced license, Class 2 (24 ports), Perpetual license for EX3400 24-port switches
S-EX-P-C2-P Software, EX Series Premium license, Class 2 (24 ports), Perpetual license for EX3400 24-port switches
S-EX-A-C3-P Software, EX Series Advanced license, Class 3 (32 or 48 ports), Perpetual license for EX3400 48-port switches
S-EX-P-C3-P Software, EX Series Premium license, Class 3 (32 or 48 ports), Perpetual license for EX3400 48-port switches
EX-24-EFL Enhanced feature license for EX3400 24-port switches
EX-48-EFL Enhanced feature license for EX3400 48-port switches
EX-24-AFL Advanced feature license for EX3400-24T, and EX3400-24P switches
EX-48-AFL Advanced feature license for EX3400-48P, EX3400-48T, EX3400-48T-AFI, EX3400-48T-DC, and EX3400-48T-DC-AFI switches
EX-QFX-MACSEC-ACC4 MACsec software license for EX3400, EX4300, and EX4200 access switches
Power Supplies
JPSU-150-AC-AFI EX3400 150W AC power supply, back-to-front airflow (power cord ordered separately)
JPSU-150-AC-AFO EX3400 150W AC power supply, front-to-back airflow (power cord ordered separately)
JPSU-150-DC-AFO EX3400 150W DC power supply, front-to-back airflow (power cord ordered separately)
JPSU-600-AC-AFO EX3400 600W AC power supply, front-to-back airflow (power cord ordered separately)
JPSU-920-AC-AFO EX3400 920W AC power supply, front-to-back airflow (power cord ordered separately)
Fans
EX3400-FAN-AFI EX3400 back-to-front fan, spare
EX3400-FAN-AFO EX3400 front-to-back fan, spare
Optics
EX-SFP-10GE-DAC-1M SFP+ 10-Gigabit Ethernet Direct Attach Copper (twinax copper cable), 1m
EX-SFP-10GE-DAC-3M SFP+ 10-Gigabit Ethernet Direct Attach Copper (twinax copper cable), 3m
EX-SFP-10GE-DAC-5M SFP+ 10-Gigabit Ethernet Direct Attach Copper (twinax copper cable), 5m
EX-SFP-10GE-DAC-7M SFP+ 10-Gigabit Ethernet Direct Attach Copper (twinax copper cable), 7m
EX-SFP-10GE-ER SFP+ 10GBASE-ER 10-Gigabit Ethernet Optics, 1550 nm for 40 km transmission on SMF
EX-SFP-10GE-ZR SFP+ 10GBASE-ZR; LC connector; 1550 nm; 80 km reach on single-mode fiber
EX-SFP-10GE-LR SFP+ 10GBASE-LR 10-Gigabit Ethernet Optics, 1310 nm for 10 km transmission on single-mode fiber-optic (SMF)
EX-SFP-10GE-LRM SFP+ 10-Gigabit Ethernet LRM Optics, 1310 nm for 220m transmission on multimode fiber-optic (MMF)
EX-SFP-10GE-SR SFP+ 10GBASE-SR 10-Gigabit Ethernet Optics, 850 nm for up to 300m transmission on MMF
EX-SFP-10GE-USR SFP+ 10-Gigabit Ethernet Ultra Short Reach Optics, 850 nm for 10m on OM1, 20m on OM2, 100m on OM3 multimode fiber
EX-SFP-1GE-LX SFP 1000BASE-LX Gigabit Ethernet Optics, 1310 nm for 10 km transmission on SMF
EX-SFP-1GE-LX40K SFP 1000BASE-LX Gigabit Ethernet Optics, 1310 nm for 40 km transmission on SMF
EX-SFP-1GE-SX SFP 1000BASE-SX Gigabit Ethernet Optics, 850 nm for up to 550m transmission on MMF
EX-SFP-1GE-LH SFP 1000BASE-LH Gigabit Ethernet Optics, 1550 nm for 70 km transmission on SMF
EX-SFP-1GE-T SFP 10/100/1000BASE-T Copper Transceiver Module for up to 100m transmission on Category 5
EX-SFP-GE10KT13R14 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1310 nm/Rx 1490 nm for 10 km transmission on single strand of SMF
EX-SFP-GE10KT13R15 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1310 nm/Rx 1550 nm for 10 km transmission on single strand of SMF
EX-SFP-GE10KT14R13 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1490 nm/Rx 1310 nm for 10 km transmission on single strand of SMF
EX-SFP-GE10KT15R13 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1550 nm/Rx 1310 nm for 10 km transmission on single strand of SMF
EX-SFP-GE40KT13R15 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1310 nm/Rx 1550 nm for 40 km transmission on single strand of SMF
EX-SFP-GE40KT15R13 SFP 1000BASE-BX Gigabit Ethernet Optics, Tx 1550 nm/Rx 1310 nm for 40 km transmission on single strand of SMF
EX-SFP-GE80KCW1470 SFP Gigabit Ethernet CWDM, LC connector; 1470 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1490 SFP Gigabit Ethernet CWDM, LC connector; 1490 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1510 SFP Gigabit Ethernet CWDM, LC connector; 1510 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1530 SFP Gigabit Ethernet CWDM, LC connector; 1530 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1550 SFP Gigabit Ethernet CWDM, LC connector; 1550 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1570 SFP Gigabit Ethernet CWDM, LC connector; 1570 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1590 SFP Gigabit Ethernet CWDM, LC connector; 1590 nm, 80 km reach on single-mode fiber
EX-SFP-GE80KCW1610 SFP Gigabit Ethernet CWDM, LC connector; 1610 nm, 80 km reach on single-mode fiber
For 40G VCP Ports
QFX-QSFP-40G-SR4 QSFP+ 40GBASE-SR4 40-Gigabit Optics, 850 nm for up to 150m transmission on multimode fiber
QFX-QSFP-DAC-1M QSFP+ 40-Gbps QSFP+ Passive DAC Cable, 1 meter
QFX-QSFP-DAC-3M QSFP+ 40-Gbps QSFP+ Passive DAC Cable, 3 meter
EX-QSFP-40GE-DAC-50CM QSFP+ 40-Gbps QSFP+ Passive DAC Cable, 50 cm
JNP-QSFP-DAC-5M QSFP+ 40-Gbps QSFP+ Passive DAC Cable, 5 meter
QFX-QSFP-40G-eSR4 QSFP+ 40-Gbps QSFP+ on OM3/OM4 multimode fiber
JNP-QSFP-40G-LR4 QSFP+ 40-Gbps QSFP+, 10 km range on single-mode fiber

About Juniper Networks

At Juniper Networks, we are dedicated to dramatically simplifying network operations and driving superior experiences for end users. Our solutions deliver industry-leading insight, automation, security and AI to drive real business results. We believe that powering connections will bring us closer together while empowering us all to solve the world’s greatest challenges of well-being, sustainability and equality.

 

1000581 - 019 - EN SEP 2021