Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    SRX5800 服务网关端口模块故障排除

    问题

    端口模块未正常工作。

    解决方案

    • 观察端口模块面板上的 LED,以检查端口模块上每个端口的状态。
    • 检查端口模块的状态,方法是输入 show chassis fpc pic-status CLI 命令。 Flex IOC 中的端口模块槽位号为 01
      user@host> show chassis fpc pic-status
      Slot 0   Online       SRX5k SPC
        PIC 0  Online       SPU Cp-Flow
        PIC 1  Online       SPU Flow
      Slot 3   Online       SRX5k DPC 4X 10GE
        PIC 0  Online       1x 10GE(LAN/WAN) RichQ
        PIC 1  Online       1x 10GE(LAN/WAN) RichQ
        PIC 2  Online       1x 10GE(LAN/WAN) RichQ
        PIC 3  Online       1x 10GE(LAN/WAN) RichQ
      Slot 5   Online       SRX5k FIOC
        PIC 0  Online       16x 1GE TX
        PIC 1  Online       4x 10GE XFP

      有关该命令的输出的更详细说明,请参阅位于 www.juniper.net/techpubs/ 上的 Junos OS 系统基础知识和服务命令参考

    Published: 2014-05-09