Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    安装 T1600 DIMM 模块

    要将 DIMM 模块插入路由引擎中:

    1. 将静电放电 (ESD) 接地腕带绑到裸露的手腕上,然后将腕带连接到机箱上的某个 ESD 点。
    2. 从防静电袋中取出 DIMM 模块。
    3. 要打开空 DIMM 插槽,请按开塑料弹出器。
    4. 抓住 DIMM 模块的边缘,小心不要触碰到任何电子组件。
    5. 稳定地按压两端以将模块推入插槽中,直至弹出器完全返回闭合位置。
    6. 安装路由引擎。
    7. 您可以通过以下方法查看 SDRAM 配置并检查 DIMM 是否安装正确:输入 show chassis routing-engine 命令。
      user@host> show chassis routing-engine
      Routing Engine status:
        Slot 0:
          Current state                  Master
          Election priority              Master (default)
          Temperature                 32 degrees C / 89 degrees F
          CPU temperature             33 degrees C / 91 degrees F
          DRAM                      2048 MB
          Memory utilization           8 percent
          CPU utilization:
            User                       0 percent
            Background                 0 percent
            Kernel                     2 percent
            Interrupt                  0 percent
            Idle                      98 percent
          Model                          RE-4.0
          Serial ID                      P13004101110
          Start time                     2007-04-30 08:38:22 PDT
          Uptime                         2 days, 2 hours, 22 minutes, 43 seconds
          Load averages:                 1 minute   5 minute  15 minute
                                             0.02       0.02       0.00
      

    图 1: 安装 DIMM 模块

    安装 DIMM 模块

    Published: 2014-05-09