Verify the Chassis Cluster Configuration
Purpose
Verify that the chassis cluster is operational after you set up the vSRX Virtual Firewall instances for clustering and set the cluster ID and the node ID.
Action
After reboot, the two nodes are reachable on interface
fxp0 with SSH. If the configuration is operational, the show
chassis cluster status
command displays output similar to that
shown in the following sample output.
vSRX Virtual Firewall> show chassis cluster status
Cluster ID: 1 Node Priority Status Preempt Manual Monitor-failures Redundancy group: 0 , Failover count: 1 node0 100 secondary no no None node1 10 primary no no None Redundancy group: 1 , Failover count: 2 node0 100 secondary no no None node1 10 primary no no None
A cluster is healthy when both the primary and the secondary nodes are present and when both have a priority greater than 0.