set address change
Syntax
set address change ui_fqdn <UI-FQDN>
set address change dcs_fqdn <DCS-FQDN>
set address change log_fqdn <Log-FQDN>
set address change ui_address <UI-address>
set address change dcs_address <DCS-address>
set address change log_address <Log-address>
Description
Update the virtual IP addresses and Fully Qualified Domain Names (FQDNs) for the UI, device connection, and log collector.
Options
| address change |
Update the IP addresses and FQDNs. Specify the new IP address
or
FQDN.
For example, |
Sample Output
set address change
ui_fqdn <UI-FQDN>If the FQDN does not resolve to the IP address, a warning is displayed as shown below. However, you can still change the UI FQDN.
set address change ui_fqdn sample-ova16.lab.organization.net 2025-09-24 16:26:02 UTC Warning: FQDN sample-ova16.lab.organization.net resolves to 10.157.81.65, which does not match the configured address 10.157.86.112. This may be OK if FQDN resolves to a NAT'ed IP Successfully updated
Required Privilege Level
CLI Administrator
Release Information
Command introduced in Juniper Security Director Release 25.2.2.