Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuration Templates Overview

Juniper Security Director Cloud offers configuration templates to set up and manage configurations for Juniper Networks and third-party devices throughout their life cycle. Configuration templates support the deployment of customized device configurations.

You can define the following types of configuration templates:

  • Globally—Specifies the configuration to apply to all the devices managed by Juniper Security Director Cloud, such as SNMP configuration.

  • Device-specific—Specifies a configuration that is specific to a device, such as BGP configuration.

Juniper Security Director Cloud offers several predefined configuration templates. You can copy an existing template and change its parameters to create a customized configuration template. Both administrators and privileged users can add new configuration templates.

Table 1: Predefined Configuration Templates

Name

Description

AE_DEVICE_COUNT

Configure the aggregated Ethernet interfaces on a device.

BANNER

Configure the banner that is displayed when you log in to a device.

DNS

Configure DNS server settings on a device.

DOMAIN_NAME

Configure the domain name on a device.

HOSTNAME

Configure the hostname on a device.

LLDP

Enable and configure Link Layer Discovery Protocol (LLDP) on all interfaces of a device.

LOCAL_USER

Configure a local user on a device.

NETCONF

Configure NETCONF on a device.

NTP

Configure NTP settings on a device.

SNMP

Configure basic SNMPv2 parameters on a device.

SSH

Configure SSH parameters on a device.

SYSLOG

Configure system log settings on a device.

DHCP

Configure DHCP Pool and DHCP Server Group parameters on a device.

You can create, edit, clone, and remove configuration templates. To access this page, select SRX > Device Management > Configuration Templates.

Configuration Template Benefits

Configuration templates offer a way to develop customized configurations and push them to various devices. You can deploy configurations that extend beyond the scope of the predefined templates available in Juniper Security Director Cloud.

Configuration Template Workflow

Table 2 describes the workflow to deploy configuration templates.

Table 2: Configuration Template Workflow

Step

Description

1

Create a new template. See Add a Configuration Template.

Or

Verify and use a predefined template. See Preview and Render a Configuration Template.

2

Deploy a configuration template on active devices. You can add new templates on active devices or add more configurations on configured devices. See Add a Configuration Template.

You can also clone an existing configuration template and modify the cloned template instead of creating a new template. See Edit, Clone, and Delete a Configuration Template.