Demand Window Fields
This topic describes router-specific fields in the node, link, interface, demand, and tunnel tables as well as the Application Options windows.
Field |
Description |
File Format |
---|---|---|
VPN |
Virtual Private Network |
demand file, owner field |
For a description of general details for demands, refer to the Paragon Planner User Interface Guide. For more information about VPNs, see Paragon Planner Virtual Private Networks Overview.
Field |
Description |
File Format |
---|---|---|
Guaranteed BW |
Specifies that the demand should route over a Guaranteed Bandwidth (e.g., subpool) tunnel |
GB, |
Bi-Directional |
If this checkbox is selected, the flow will be routed along the same route in both directions. |
DUPLEX, |
Policy Class |
CoS Policy. |
COS= policyname, where policyname is substituted by the CoS policy name |
Routing Instance |
If this field is selected, the flow must route only on interfaces of the given OSPF routing instance/process ID. |
ROUTEINST=<nameorID> |
Multicast |
If this checkbox is selected, specify the destination IP in the adjacent select menu. |
MCip-address, where ip-address is substituted by the destination IP address |
PIM Mode |
The following Protocol Independent Multicast modes can be specified:
|
pim-mode, where pim-mode is substituted by the multicast mode (e.g., PIM-DM) |
ECMP |
Specify that this demand can be load-balanced to Equal Cost Multiple Paths, by splitting the flow into this number of sub-flows. |
ECMP= n, where n is substituted by an integer |
Signaling Protocol |
When selecting VoIP as the traffic type, you can select a signaling protocol (e.g., H.323, SIP) |
VOIP= protocol, where protocol is the signaling protocol (e.g., H.323, SIP) |
Codec |
When selecting VoIP as the traffic type, this offers a wide range of codecs, such as 64K(G.711) |
Codec= codec_bandwidth, (e.g., Codec=64K) |