Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Network Information Table Overview

The network information table at the bottom of the Planner Topology has tabs across the top which change according to the tab you select. Within the tables, each row represents an element. When you select one or more elements in the table, the corresponding elements are highlighted in the topology map.

The network information table displays detailed information about each network element in the following tabs:

  • Filter Entries—Filter the table entries by adding new filtering criteria.

    Hover over the Filter (funnel) icon and select Add Filter. On the Add Criteria page, select the filtering criteria from the Field and Condition list, and enter the text to be compared in the Value field. Click Add.

    The filtered table entries are listed and the filter criteria name is displayed above the table column names.

    You can click the cross (X) icon (next to the filter name) to remove the filtering criteria.

    Note:
    • You can add multiple filtering criteria. Once you add the multiple filtering criteria, you can select the And condition to display the entries matching all the filtering criteria or select the Or condition to display the entries matching any one of the filtering criteria.

    • Quick filter: Save the filtering criteria as quick filters. Once you have added all the filtering criteria, you can save a particular criteria or multiple criteria for future use by clicking Save.

      On the Save Filter window, enter a name for the filter, optionally toggle the Set as Default button if you want to use this filtering criteria by default, and click OK.

      The saved filters are displayed under Quick Filters when you hover over the Filter (funnel) icon. You can then apply these saved filters to the table entries.

  • Show/Hide Columns—Choose to show or hide a specific column in the table.

    Hover over the More Options (vertical ellipsis) > Show/Hide Columns and select the Column-Name check box of the columns you want to display in the table.

  • Reset Preference—Reset the displayed columns to the default set of columns for each tab in the table.

    Hover over the More Options (vertical ellipsis) and select Reset Preference.

  • Sort Entries—Click the column name to highlight the up and down arrows next to the column name. Sort the table entries in ascending or descending order of that column by clicking the up or down arrow respectively.

    Note:
    • Click on the refresh icon at the bottom-left corner of the network information table to manually refresh the table entries.

    • Click the Display list (bottom-right corner of the table) to select the number of row (50, 100, 200, or 500 entries) visible on the table.