Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Resolved Issues

This section lists the resolved issues in NorthStar Controller Release 6.2.6.

  • The upper limit of the SRGB label range in the Node table appears as upper limit + 1. For example, when the SRGB range is 1000-9999, the range displayed on the NorthStar UI is 1000-10000.

  • An abnormal rate of PCEP activity could lead to issues where configured parameters and layouts might not load on failover or during application restart.

  • Path Optimized Status displays 0 optimized paths.

  • Path Optimization reprovisions already optimized LSPs.

  • Option to ignore LSP operating status in config state.

  • When using analytics threshold rerouting, optimization might not have placed LSPs on most optimal path.

  • Path optimization runs might stop due to deadlock in the child process. Optimization is now performed in main the process to avoid this scenario.

  • Updating link metrics in NorthStar Planner might have cleared utilization.

  • NorthStar Planner does not place all tunnels in archive.

  • NorthStar Planner reports delay values in microseconds when it should be in milliseconds.

  • Some TE++ tunnel specifications for NorthStar Planner Live Network Archive do not include the explicit required path PR.

  • Topology filter might not work properly for all nodes after performing process restart (on bmpMonitor, topoServer and topoFilter).

  • The RSVP Utilization of links carrying Container sub-LSP could be incorrectly computed.

  • The RSVP Utilization of links carrying Container sub-LSPs is incorrectly computed when you sync the network model (by clicking the Sync option under the Sync Network Model in Advanced Settings).

  • Rest handler is not updating destination IP address for LSP correctly in the database.

  • When link loss threshold is set for a link, the link is put into maintenance when the link is brought up during device reboot.