Known Issues

Table 1 lists known issues in NorthStar Controller Release 6.2.3. If an identifier is reported, it is the assigned identifier in the GNATS problem report tracking system.

Table 1: Known Issues in NorthStar Controller Release 6.2.3.
`Identifier`	`Description`
1449676	Toposerver and mladapter restart intermittently.
1502238	NorthStar Planner ingress and egress traffic shows some interfaces with Terabyte information.
NA	SR-LSP is not supported in BGP confederation topology.
NA	TE-Tunnel should use SIGNAME, if available, to prevent creation of duplicate or deactivated tunnels in NorthStar Planner.
NA	Audit logs are not generated for REST API calls made for reset topology, sync topology, and optimize now operations.
NA	Filter is not working properly for audit log path, description, and status.
NA	The routing method is CSPF for P2MP groups which are configured from devices (as opposed to from within NorthStar), when the expected routing method is routeByDevice.
NA	NorthStar Planner Desktop: There is no validation on the NorthStar Planner Desktop when a license upload is attempted.
NA	Elastic Search cleanup task should remove LSP events more frequently.
NA	P2MP: NorthStar cannot process simultaneous different operations that modify a single device/LSP (POST and PATCH, POST and DELETE, PATCH and DELETE). To work around this issue, complete the first request and verify success in the NorthStar UI or on the device before submitting the next request.
NA	Interface name was copied over to persisted state when user add delay to a link.
NA	TopoServer fails to remove LSP config state.
NA	For BMP topology acquisition, SR enabled-node might be displayed as not SR-enabled when the node has multiple IP addresses configured on the loopback interface.
NA	Maintenance might lose its elements (nodes, links, SRLGs) during a TopoServer restart event such as HA switchover, sync network model, or reset network model.
NA	Issue in provisioning SR-TE LSP via NETCONF with routeByDevice routing method on Junos version older than 19.1R1.1 when "Allow any SID at first hop" is enabled on the ingress node.
NA	Some TE++ tunnel specifications for NorthStar Planner Live Network Archive do not include the explicit required path PR.
NA	NETCONF color SR towards remote ASBR for Junos OS Release 19.1R1.1 and above is not working due to NETCONF template issue. The SR LSP Op status is showing as Up in NorthStar while the router shows the Op status as Down.
NA	Topology filter might not work properly for all nodes after performing process restart (on bmpMonitor, topoServer and topoFilter). As a workaround, you can delete the impacted topology filter and add it back in again.
NA	NorthStar is unable to delegate or remove ODN SR LSPs. As a workaround, add or remove the `lsp-external-controller pccd` statement in your router configuration.
NA	After issuing a `service northstar restart` command, logstash might show an unexpected error message. As a workaround, restart the logstash process.
NA	Scheduling for P2MP LSP is lost after a Path Computation Server (PCS) restart. This can cause an inactive P2MP LSP to be reactivated. The PCS restarts when you sync or reset the topology, during an HA switchover, when you upgrade NorthStar or install a patch.
NA	When the NorthStar Controller is in High Availability (HA) mode, a timeout error might occur when deleting a dummy node.
NA	NorthStar does not support provisioning of Netconf inter-AS SR LSP that has ECMP paths towards its destination with routeByDevice as routing method.
NA	SR enabled mode shows “SR disabled” if NorthStar does not identify a node with the correct primary loopback address. This can cause some of the node attributes (i.e. SR enabled flag) to be incorrect.
NA	When you change the time zone and date/time user preferences in NorthStar, the changes do not take effect.
NA	Stale demands cannot be deleted after NS image is upgraded The workaround is to reload the demands and then remove stale duplicated demands from the database.
NA	If there is an multiple path with equal cost existing towards a destination, you cannot provision an inter-AS SR LSP with routing method routebydevice by using the NetConf provisioning method.
NA	If a single IGP spans multiple BGP autonomous systems, the time taken to place demands is longer and loops are created in the placed demands. Workaround: Set IGP Override to 1 under Tools > Options > General > Path Placement > BGP to resolve this issue.
NA	If you upgrade to NorthStar Release 6.2.3 from NorthStar Release 6.1.0 or earlier, by default, only the networks archived during the past fourteen days are retained.
1660187	While saving network archive in NorthStar Planner with a new runcode or directory, traffic files might not be saved in the new location.