Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Session Trends Monitor

The Session Trends monitor provides summary and detailed trend information about the number of active sessions and users within the node selected in the View pane.
Note:

After a device is discovered, trend data does not appear immediately—it appears only after three polling periods have occurred.

Session Trends

The summary view of the Session Trends monitor displays a line graph of the number of active sessions and users over time within the node selected in the View pane. The vertical axis is the number of active sessions or users. The horizontal axis shows the polling interval times.

You can perform the following actions on the line graph:

  • Change the time period over which to display the trend data by selecting a time period from the list in the upper right corner.

  • Select which SSID to monitor from the Choose SSID list.

  • Select which VLAN to monitor from the Choose VLAN list.

    This option appears only when you have selected a switch in the View Pane.

  • Display the number of sessions or users at a polling interval by mousing over the plotted data point.

  • Highlight a line in the graph by mousing over the line’s legend.

  • Remove or restore a line by clicking its legend.

Because data points plotted against the x-axis can represent data consolidated from multiple polling periods, three lines are plotted for session count and for user count: the maximum, minimum, and average counts that occurred during the consolidated polling periods.

Session Details

The Session Details window provides detailed trend information about the number of active sessions and users within the current node selected in the View pane. It contains these panes:

  • The top pane contains a line graph of the number of active sessions and users over time within the node selected in the View pane.

    You can perform the following actions on the line graph:

    • Change the time period over which to display the trend data by selecting a time period from the list in the upper right corner.

    • Display the number of sessions or users at a polling interval by mousing over the plotted data point.

    • Highlight a line in the graph by mousing over the line’s legend.

    • Remove or restore a line by clicking its legend.

    Note:

    Since data points plotted against the x-axis can represent data consolidated from multiple polling periods, three lines are plotted for both session count and user count: the maximum, minimum, and average session and user counts that occurred during the consolidated polling periods.

  • The bottom pane contains a table with detailed information about the active sessions.

The following table describes the columns that appear in current session details tables.

Table 1: User Session Details
Table Column Description
User name Username of the client.
MAC Address MAC address of the client.
Device type Device type of the client.
Device group Device group of the client.
Device Profile Device profile of the client.
Controller IP IP address of the controller to which the client is connected.
AP ID ID of the wireless access point to which the client is connected.
AP NAME Name of the wireless access point to which the client is connected.
SSID SSID to which the wireless client is connected.
VLAN VLAN to which the client is connected.
Client IP IP address of the client.
Auth Type Authorization type used for the client.
B/w[KBps] Bandwidth used by the client.
Data Usage (KBytes) Data transmitted and received by the client, in kilobytes.
Elapsed Time Length of time the session has been active.
Sample Time Time when the most recent sample was taken.
RSSI Received signal strength indication (RSSI). Specified in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal.
Roam In Time The time when the session roamed in to the wireless access point.
Note:

Some table columns are hidden by default. To select which columns to display, mouse over any column heading, click the arrow that appears, mouse over Columns in the drop-down menu, and then select the columns to display from the list.