Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Delete a High Availability Cluster

If your WAN Edge devices will no longer be clustered to perform high availability, you must delete the cluster from Mist to reprovision the devices as standalone devices to the inventory.

If your WAN Edge devices will no longer be acting as a high availability cluster, you should delete the cluster so that they are reprovisioned to the Mist inventory as standalone devices.
  1. In the Juniper Mist portal, on the left menu, go to Organization > Admin >Inventory and select the WAN Edges tab.
    The page displays a list of WAN Edge devices. You can set the view as org (Entire Org) or Site in the Inventory page.
  2. Select the high availability pair and click Delete Cluster under More.
    Figure 1: Select High Availability Cluster to Delete Select High Availability Cluster to Delete

    Click Confirm on the Confirm Delete Cluster window.

    Figure 2: Confirm Delete High Availability Cluster Confirm Delete High Availability Cluster

    Juniper Mist re-provisions the devices as standalone devices in the same site.

    Refresh your browser and check under WAN Edges on the Inventory page to find out if your WAN Edge devices are available as standalone devices.