Subscription Requirements for Marvis Actions

Subscription Types

The Actions shown on the dashboard differ according to your Marvis subscriptions. You may be able to see the count for actions not included in you subscription, but you won't be able to drill down to the scope, details, and root level analysis.

Be aware of the requirements for the types of subscription and purchase the subscriptions that you need for your network.

Different Marvis subscriptions enable different Marvis actions. For example, you need a Marvis for Wired subscription to see Wired actions. The actions for each type of subscription are shown in the tables in the section of this topic.

Note:

If you are using a trial subscription type, you can view all Marvis Actions until the trial subscription ends.

Available Actions for Your Subscriptions

Available actions vary for different subscriptions, as appropriate for the types of devices that are associated with these subscriptions. The following tables show the available actions for each subscription type.

Table 1: Subscription Type: Marvis for Wired Actions

Category	Available Actions
Connectivity	Authentication Failure
	DHCP Failure
Switch	Negotiation Incomplete
	MTU Mismatch
	Loop Detected
	Network Port Flap
	High CPU
	Port Stuck
	Traffic Anomaly
Other Actions	Persistently Failing Clients
	Access Port Flap

Table 2: Subscription Type: Marvis for WAN Actions

Category	Available Actions
WAN Edge	MTU Mismatch
	Bad WAN Uplink
	VPN Path Down
	Non-Compliant

Table 3: Subscription Type: Marvis for Wireless Actions

Category	Available Actions
Layer 1	Bad Cable
Connectivity	Authentication Failure
	DHCP Failure
	ARP Failure
	DNS Failure
AP	Offline
	Health Check Failed
	Non-compliant
	Coverage Hole
	Insufficient Capacity
	AP Loop Detected
Switch	Missing VLAN
Other Actions	Persistently Failing Clients