Add an SRX Series Firewall to Juniper Security Director Cloud
In order for your device to be managed by Juniper Security Director Cloud, ensure the following:
-
Your device must have Internet connectivity and access to the Juniper Security Director Cloud portal.
-
Before adding, you must open the following ports of your device so that it communicates with Juniper Security Director Cloud:
-
TCP/443 (HTTPS) for Juniper Security Director Cloud portal and Redirect server
-
TCP/7804 (NETCONF) for SRX Series Firewall outbound access to Juniper Security Director Cloud portal
-
TCP/6514 (TLS syslog)
-
TCP/53 (DNS) - (IP: 8.8.8.8)
-
UDP/53 (DNS) - (IP: 8.8.4.4)
-
Here’s how you can add your device to Juniper Security Director Cloud from J-Web:
-
When you have logged into the J-Web and remove your device from Juniper Security Director Cloud, J-Web still displays the status as Manged by Juniper Security Director Cloud. Log in to J-Web again to see the label changed to Add Device to Juniper Security Director Cloud.
-
If there are any network issues between the SRX Series Firewall and Juniper Security Director Cloud, J-Web still displays the status as Manged by Juniper Security Director Cloud.
Once added, you can see your device on the Device Management > Devices page when you log into the Juniper Security Director Cloud portal. You can only delete your device from Juniper Security Director Cloud and not from the J-Web GUI. To remove the device, select your device on the Devices page and click the delete icon.