Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

ON THIS PAGE

Tasks You Can Perform
Field Descriptions

About the User Management Page

You are here: Device Administration > User Management.

Using this page, you can configure user details, authentication methods, and passwords.

Tasks You Can Perform

You can perform the following tasks from this page:

Add a user. See Add a User.
Edit a user. See Edit a User.
Delete a user. See Delete User.

Field Descriptions

Table 1 describes the fields on the User Management page.

Table 1: Fields on the User Management Page
Field	Description
User Details
User Details	Provides the users details to the device’s local database. The options available are: Add Edit Delete Search Filter
Authentication Methods
Authentication Method And Order	Enable authentication methods and drag and drop to change the authentication order. The options available are: Password RADIUS Servers TACACS+Servers
RADIUS Servers
RADIUS Servers	Specifies the details of RADIUS servers. Click Configure. To add a new RADIUS server, click +. Then enter the details specified below and click OK. IP Address—Enter the server’s 32–bit IP address. Password—Enter the secret password for the server. Confirm Password—Re-enter the secret password for the server. Server Port—Enter an appropriate port. Source Address—Enter the source IP address of the server. Time out—Specify the amount of time (in seconds) the device should wait for a response from the server. Retry Attempts—Specify the number of times that the server should try to verify the user’s credentials. To delete an existing RADIUS server, select it and click Delete.
TACACS
TACACS Servers	Specifies the details of TACACS servers. Click Configure. To add a new TACACS server, click +. Then enter the details specified below and click OK. IP Address—Enter the server’s 32–bit IP address. Password—Enter the secret password for the server. Confirm Password—Re-enter the secret password for the server. Server Port—Enter an appropriate port. Source IP Address—Enter the source IP address of the server. Time out—Specify the amount of time (in seconds) the device should wait for a response from the server. To delete an existing TACACS server, select it and click Delete.
Password Settings Note: J-Web interface does not support configuring the number of characters by which the new password should be different from the existing password.
Minimum Reuse	Click top or bottom arrow to specify the minimum number of old passwords that you want to use. Range: 1-20.
Maximum Lifetime	Click top or bottom arrow to specify the maximum lifetime of your password in days. Range: 30-365.
Minimum Lifetime	Click top or bottom arrow to specify the minimum lifetime of your password in days. Range: 1-30.