Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
Help Center User GuideGetting Started
 
X
User Guide
Getting Started
 

Configure PPPoE

Note:

This menu is available only for SRX300 lines of devices and SRX550M device.

You are here: Network > Connectivity > PPPoE.

PPPoE connects multiple hosts on an Ethernet LAN to a remote site through a single customer premises equipment (CPE) device (Juniper Networks device).

Use the configure PPPoE tasks to configure the PPPoE connection. The PPPoE wizard guides you to set up a PPPoE client over the Ethernet connection.

Note:

On all branch SRX Series devices, the PPPoE wizard has the following limitations:

  • While you use the load and save functionality, the port details are not saved in the client file.

  • The Non Wizard connection option cannot be edited or deleted through the wizard. Use the CLI to edit or delete the connections.

  • The PPPoE wizard cannot be launched if the backend file is corrupted.

  • The PPPoE wizard cannot be loaded from the client file if non-wizard connections share the same units.

  • The PPPoE wizard cannot load the saved file from one platform to another platform.

  • There is no backward compatibility between PPPoE wizard Phase 2 to PPPoE wizard Phase 1. As a result, the PPPoE connection from Phase 2 will not be shown in Phase 1 when you downgrade to an earlier release.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit
<script type="text/javascript">_satellite.pageBottom();</script>