Validation Framework

In the solution validation topology, the MX Series routers act as PE1 and PE2, configured MPLS WAN between them. Table 1 outlines the list of protocols configured.

For fan-out, ACX7024 is used at both ends. A single ACX7024 is shared for both sides as shown in Figure 1 . Customer traffic is emulated through Ixia.

Table 1: Protocol Scale Parameters
Protocol	Scale Number	Device Role/Name
L3VPN routes per VRF	2000	PE1,PE2
L2VPN Instances	12	PE1,PE2
EVPN Instances	12	PE1,PE2
L2VPN Instances	12	PE1,PE2
VPLS Instances	12	PE1,PE2
L2CKT Neighbors	12	PE1,PE2
iBGP Peers	1	PE1,PE2
LDP Sessions	1	PE1,PE2
OSPF Neighbors	1	PE1,PE2
CFM Sessions	12	PE1,PE2
Local-switching	24	Fan-out
Customers (asynchronous notification)	24	Fan-out
CFM Sessions	24	Fan-out

Test Bed

Figure 1: Validation Test-Bed Topology A diagram of a computer network Description automatically generated

Platforms / Devices Under Test (DUT)

Table 2 show devices used in testing, their role in the fan-out solution and the version of Junos OS used for testing.

Table 2: Platforms
Role	Platform	OS
Fanout device (FO)	ACX7024	Junos OS Evolved Release 23.4R1-S1
PE1 (DUT)	MX240	Junos OS Release 23.4R1-S1
P (Helper)	MX240	Junos OS Release 23.4R1-S1
PE2	MX240	Junos OS Release 23.4R1-S1
Helper switch (HS1 & HS2)	ACX7100-48L	Junos OS Evolved Release 23.4R1-S1

Test Bed Configuration

Contact your Juniper Networks representative to obtain the full archive of the test bed configuration used for this JVD.

ON THIS PAGE

Validation Framework

Test Bed

Platforms / Devices Under Test (DUT)

Test Bed Configuration