Test Objectives

Test Goals

The testing for this Phase 2 JVD was performed with the following goals in mind. Also, consult the separate Test Report for more information. The testing was executed with a focus on the following:

• Testing with Junos OS version 24.4R2.
• Testing with four collapsed-core switches as ring and mesh topologies.
• Testing with IPv6 underlay and overlay configured.
• Testing with Virtual Chassis that have two or four members.
• Testing with features that are activated as combinations at the same time.

The scale testing for this design was done with:

• Up to 20 VRFs.
• Up to 500 VLANs (across all VRFs).
• Up to 45K IP and MAC addresses of simulated wired clients.

Test Non-Goals

The testing for this JVD was not performed, for various reasons, on the following items:

• Testing this fabric with redundant WAN routers. This is already described in a separate JVD extension in common for all fabrics.
• Juniper Mist Edge integration for Wi-Fi scaling.
• Scaled testing when EZ-LAG with bridged overlay is used. The scaling of this solution depends mostly on the WAN router resources external to the fabric. Check with the WAN router vendor in this case.